User guide


4.4. InteractiveSettingsoptions
TheʺInteractiveʺ sectionofthemimioStudioSettingsdialog(seeFigure4 ‐4)permitsyoutocalibrateor
enable(ifcalibrationhasalreadybeendone)Interactivemodeoperationwhenaprojectedcomputerdesktop
isdisplayedonawhiteboardtowhichthemimiocapturedeviceisattached.
Calibrate‐click onthis buttontoenter Interactivemodeby initiatingcalibrationofthe projectorimageon
theboard.Followtheinstructionsonthescreen,pressingthestylusdowninallninecalibrationtargetpoints.
Enable–clickheretoenterInteractivemodewhencalibrationhasalreadybeencompleted.
Disable–clickherewhenbuttonissolabeledtoexitInteractivemode.
Use previous calibration – check this box to automatically enter Interactive mode using the most recent
calibration.Itisbesttoselectthisoptiononlywhenyourmimiodeviceboardsurfaceandyourdataprojector
areinfixedpositionsand
cannotbemoved.Thedefaultisunselected.

Figure4‐1:InteractiveoptionswithintheSettingsdialog
4.5. AdjustingNetMeetingoptions
TheʺNetMeetingʺsection oftheSettingsdialog(Figure4‐5)enablesamimiodeviceto provideinputfor
InternetconferencingsessionsusingMicrosoftNetMeeting.
Enable NetMeeting interaction–whencheckedyourmimioDigitalInkrecordeddatawillalsoappearinthe
NetMeeting“virtual”whiteboardifaNetMeetingsessionisactive.TheNetMeetingvirtualwhiteboardcan
beviewedbymeetingparticipantsinremotelocations.
Select a specific device from the drop‐down list if you wish to limit NetMeeting input to a specific mimio
capturedevice.ToallowinputfromalldevicestoNetMeeting,selectʺAny DeviceʺfromtheDevicelist.
Quick Start Guide mimio Studio Settings • 4‐9