User guide
Chapter8: UsingtheInteractiveMode
A projector combined with a mimiocapture device can be a powerful tool forpresenting information with
full computer control while at the whiteboard.While in Interactive Mode your mimio stylus controls the
motionofthecursoronyourscreen,asaninteractivetouchmouse.Youcanalsomarkupthe
screenwithany
ofthe toolsin mimioNotebook. Additionalpresentationtools arealsoavailable inmimio Tools(Spotlight
and Reveal) aswell asdirect accessto theinternet.You can set the mimioStudio Settings touse previous
calibrationsettingswhenyouenterInteractivemodeifyourwhiteboardand
projectorareinfixedposition.
8.1. StartingInteractivemode
YoucaninitiateInteractivemodefromInkRecordingModeor directlyfrom thestartofyourmimioStudio
session,onceyouhaveprojectedyourcomputerdesktopontotheboard.
8.1.1. StartingInteractivemodefromInkRecordingmode
1. Pressonthebottombuttonofthemimiocapturedevice.
2. TheprojectorimageonyourwhiteboardwillchangetothecalibrationscreenasshowninFigure8‐1.
Figure8‐1:Interactivemodecalibrationscreen
3. PlacetheplasticmimioMouseinsertintooneofthestyluspens
4. Follow the instructions on the screen, pressing the interactive stylus down at the center of each
calibration target.It is recommended to hold the stylus as perpendicular as possible to the board
whencalibratingandusingthestylus
inInteractivemode.Thiswillproduceconsistentaccuracy.
5. When the previous calibration target disappears, press it down in the center of the next calibration
target.The calibrationscreen will disappearonce youhave done thisninetimes,andyouwillbein
InteractiveMode. TheMouse(bottomleft)buttoninmimio Toolswillbedepressedtoindicatethat
youareinInteractiveMode.
Quick Start Guide Using the Interactive Mode • 8‐1