User guide




8.1.2. StartingInteractivemodefrommimioSettings
1. Open mimio Settings by right clicking on the Studioicon on the task bar or double clicking on the
SettingsbuttononthelowerrightNotebookwindow(Figure8.2).
2. ClickonCalibrateifyouneedtocalibratetheprojectedimage.Thecalibrationscreenwillappearon
theboard.
3.
Followthecalibrationstepsdescribedin8.1.1.
4. If Calibration settings are already saved, click on Enable and mimio Studio will enter Interactive
mode.

Figure8‐2:InteractivesettingsintheNotebookSettingsdialog
8.1.3. Starting,ExitingandRecalibratingInteractivemodefrommimioTools
1. ClickontheInteractivebutton onthebottomrowofmimioTools.Ifyouhavestoredcalibration
settingsthesoftwarewillenterInteractivemode.
2. Ifyoudonothavestoredcalibrationsettingsthecalibrationscreen(Figure8‐1)willappear.Follow
thecalibrationproceduredescribedin8.1.1.
3. You can exit or recalibrate Interactive
 mode by pressing on the Interactive button  while in
Interactivemode.Adialogwillappear,askingifyouwishtoExit,RecalibrateorCancel(Figure8‐
3).

Figure8‐1:Interactivemoderecalibration/exitdialog
8.2. Usingrightclick
PressingtheRightClickbutton onthebottomrowofmimio Toolswillcausethenextmimiostyluspress
tobeinterpretedasaright‐click.
Clickinthelocationwhereyouwishtogeneratetheright‐click.



Quick Start Guide Using the Interactive Mode • 8‐2