User guide


Chapter2: SettingUpYourmimioHardware
2.1. Settingupyourmimiocapturedevice
mimiocapturedevicescompatiblewithmimioStudioattachtothesystemviaaUSBcable.Theillustrations
below feature mimio Xi.Please refer to the set‐up instructions for your mimioBoard or other Studio
compatiblemimiotechnologydevice.

1. Plug the included mini‐USB cable into the socket on the
bottom recessed end of the bar (Error!
Referencesourcenotfound.).

Figure2‐1:Pluggingthemini‐BUSBcableintomimioXi.
2. Attachthemimiocapturebartoyourwhiteboardorotherwritingsurfaceusingtheplasticmounting
bracketsincludedwiththesystem(refertoError!Referencesourcenotfound.).Usingthemounting
brackets does not require you  to
 use the capture bar in only that location‐the capture bar can be
removed, used elsewhere, and returned to the clips afterwards. You can purchase additional
mountingbracketsifyourmimioXiisusedroutinelyinmultiplelocations.ThemimioXicanalsobe
attachedusingthebuilt‐insuction
cupsfortemporaryuseinanywhiteboardlocation.










Quick Start Guide Setting Up Your mimio Hardware • 2‐4