User guide
Table Of Contents
- About MimioProjector
- Getting Started
- Changing the Projector Settings
- Caring for MimioProjector
- Getting Help
- General Troubleshooting
- Image Troubleshooting
- No image is displayed
- A partial, scrolling, or incorrect image is displayed
- The notebook computer display is not displaying an image
- Image is unstable or flickering
- Image has vertical flickering bar
- Image is out of focus
- Image is stretched when displaying 16:9 DVD image
- Image is too small or too large
- Image is displayed with slanted sides
- Image is reversed
- 3D Troubleshooting
- Sound Troubleshooting
- Remote Control Troubleshooting
- Contacting Mimio
- Compatibility Modes
- Technical and Environmental Information
Turning On the Power
Status Lights
Message
Lamp status
light
Red
Temperature
status light
Red
Power status
light
Red
Power status
light
Blue
Power plug
Flash ON to
OFF 100ms
Flash ON to
OFF 100ms
Flash ON to
OFF 100ms
--
Standby -- -- ON --
Power button ON -- -- -- ON
Cooling state -- --
0.5 second H
(ON)
0.5 second L
(OFF)
flashing
--
Power button OFF
Cooling completed; Standby
mode
-- -- ON --
Firmware download ON ON ON --
Thermal sensor error
The following message is
displayed:
1. Make sure air inlets and
outlets are not blocked.
2. Make sure the
environment temperature
is under 40 degrees C
-- ON -- ON
Fan lock error
The following message is
displayed:
The projector will switch off
automatically.
--
0.5 second H
(ON)
0.5 second L
(OFF)
flashing
-- ON
Lamp error
(lamp, lamp driver, color wheel)
ON -- --
ON
21