User's Manual

Connecting your Finestra Miner
1. Power up Finestra Miner using the included power supply.
2. WARNING: Please wait 2 to 3 minutes for your Finestra Miner to boot up before starting the
installation process. Do not unplug the Finestra Miner during the set-up process.
3. If you choose to connect via Wi-Fi follow the instructions in Helium App as inidicated in Step
4.
4. Press the “+” button in the Helium App to add your gateway and follow the in-App
instructions.
Troubleshooting
1. Make sure Bluetooth is on and the phone is connected to the Internet while setting up
Finestra Miner.
2. Make sure that the Helium App has the Location permissions enabled. These can be found
under App Info > Permissions > Location
3. Make sure you have downloaded the latest version of the Helium App from the store.
Limited Warranty
Mimiq provides a limited warranty for Finestra Miner please visit:
www.thefinestra.com/warranty.
Use and Care
Finestra Miner is not water-resistant. Please use Finestra Miner only indoors and avoid direct
contact with water. Finestra Miner works best between -31° F and 167 °F (-35° C and 75° C).
FCC Compliance Statement
Contains FCC ID: 2ABCB-RPI4B
Contains IC: 20953-RPI4B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CAUTION: The grantee is not responsible for any changes or modifications not expressly
approved by the party responsible for compliance. Such modifications could void the user’s
authority to operate the equipment.