Safety Instructions These safety instructions must be followed to ensure your safety and prevent property damage. Warning/Cautions Otherwise, it may result in personal injury or property damage. Make sure to read the instructions carefully and use the product in the correct manner. Power Source: – Make sure to use USB Cable (DC 5V) only. • mimo doesn‘t require any additional power source Do not place mimo in a location exposed to moisture, dust, smoke, water, or in a car.
Product Input/Output Connectors – Do not insert any metal, such as chopsticks, coins, pins and steel. – If foreign material enters the product, disconnect the USB cable and contact a Service Center. Do not install mimo in an unstable location. – Otherwise, it may fall and cause personal injury and/or damage the product. Ensure that users do not disassemble, repair or modify the product themselves. – If the product needs to be repaired, contact a Service Center.
Product Features • USB powered monitor with Touch Screen Panel(UM-720S only) • Super Slim Foldable and Portable Design • With only USB cable connection, a user may utilize mimo as Multiple Input/Output device for Video Conference, Instant Messaging, News and Stock casting. Each model has different functions and features as listed Product Matrix below.
Package Contents Please make sure the following items are included with your monitor. Contact a local dealer to buy optional items. UM-710S/UM-720S USB CABLE User‘s Manual Install Disc ♦ Package Contents are subject to vary upon each model. If any items are missing, contact your dealer.
Connections and Installation ※mimo requires USB connection only. 1 1 USB cap : USB mini B type connector inside Buttons Standby on/off LCD Brightness +/- System Requirements • CPU : Intel Pentium/Celeron/AMD/K6/Athlon/Duron 1.2GHz or above • RAM : 512MB RAM or above • USB : at least one or more USB2.
Installing Monitor Driver (AutoRun) Insert the CD into the CD-ROM drive. Please make sure that your mimo is connected to the PC (If the CD is not running automatically please double-click the “Mimo Drive”) Installation takes about 1 minute. Do not power off or disconnect the USB cable until installation is completely finished. This may damage systems or may cause system errors. • The mimo screen resolution is fixed for the best picture quality with each model.
4 If you see following message window, select “I agree” to accept the terms of use. Program will display the progress as below. 5 When the installation is complete, the mimo setting icon appears on your system tray and the connected USB monitor information will pop-up. 6 After finish installation of the mimo driver, please follow below steps for multi-monitor setting. (Microsoft® Windows® XP Operating System) 1 Right-click on desktop then click “Display Properties”.
mimo display setting 1 When the mimo driver installation is complete, the mimo setting icon appears on your system tray. 2 Click-on mimo icon then you may see the mimo setup menu for Screen Resolution, Colors, Rotation, Extention and etc.
Installing Touch Screen Controller (UM-720S only) 1 Selecting Controller If you see following message window, select “E2i Technologies, NTR, USB” and click ”Install”. 2 Installing the Controller Click “Next” and follow on screen direction. Program will display the progress as below. 3 Finish Touch Screen Controller installation Click [Close] or using keyboard.
Click [FINISH] or using keyboard. 4 Settings and Calibrations Check the monitor number of the installed mimo at “Display Properties”. Right-click and Run the UPDD Consol (Pointer Device Setting) icon on system tray.
Chose Hardware and Click “Handling Whole desktop” menu. Select the monitor number of the installed mimo. Calibration The product is with factory default calibration value. If required user may execute Touch Screen Controller Calibration as follow. Calibration is very important procedure to align coordinates of the exact touch point on screen with Windows cursor. With the calibration user may utilize Touch Screen Control without distortion.
1 Click [Start] ––> [Programs] ––> [UPDD] ––> [Setting]. 2 Click UPDD Consol (Pointer Device Setting) icon on system tray ––> [Calibration]. Touch + mark position in order then [Confirm]. If calibration point inputs are correct click [Confirm]. In case any mistake in calibration points inputs click [Cancel] or leave the screen untouched for about 10 seconds then the Calibration Data will be scrapped. The calibrated Touch Screen coordinates may vary upon the lapse of usage time.
System Requirements & Restrictions Operating Systems • Windows XP – Service Pack 1 prior : Not supported – Service Pack 2 or after : Supported • Windows 2000 Professional – Service Pack 3 prior : Not supported – Service Pack 4 or after : Supported • Windows 2000 Server/Advanced Server/Data Center Server: Not supported • Windows Server 2003: Not supported • Windows Vista SP1(32-bit and 64-bit editions): Supported User may check the Operating System version by Right-click ‘My Computer’ ––> ‘Properties’ ––> ‘S
Troubleshooting Before calling for assistance, please read carefully below. If you do need assistance, please call local service center or contact your dealer. Q: No image on screen, I cannot turn on the mimo. A: Is USB cable connected and did you install mimo driver yet? Please run ‘mimo Installation Software’ in the CD. For more detail about driver installation, please refer to Connections & Installation chapter. Q: I cannot turn my mimo screen on. A: Please check if the USB cable is connected.
Q: I cannot boot my system after connecting mimo. A: In case i815 chipset One-Board Type PC system, please disable ‘Legacy USB support’ option in system BIOS menu and reboot the system. – BIOS setup method may differ from PC to PC, please refer to the User manual of the PC. Please refer to Microsoft homepage for more detail. Q: I cannot see DOS opening screen with mimo when my PC is booting up. A: mimo is a generic USB device.
Specifications • Model Name: MIMO UM-710S(7”WVGA), UM-720S(7”WVGA with TSP) • Display Size : Diagonal 17.78 cm 152.4 mm(H) x 91.4 mm(V), • Display Resolution : WVGA(800 x 480) • Pixel Pitch : 0.1905mm(H) x 0.1905mm(V) • Number of Color : 16.7M • Contrast : 400:1 • Input Power : USB Power(DC 5V) • Power Consumption : Max. 4W • Dimension/Weight Model Name Dimension UM-710S 180(W) x 140(L) x 25(H)mm standing 180(W) x 140(L) x 115(H)mm Weight Specifications are subject to change without prior notice.