Product Manual

Product Manual for Tornado Radio Unit
20
4 SETTING UP ON THE BENCH
The radio units can be interconnected for bench-based testing or configuration. Attenuators with the appropriate
value and power handling must be used. The RF wiring diagram shows the interconnection of attenuators, cables
and splitters for a standard bench test.
Note: If an NDL system or an MDL system with only one RRU is desired then the splitters, second RRU and
corresponding attenuators can be omitted. Mimomax can supply a splitter that provides 4 ports and ~30dB
attenuation.
Recommended equipment:
6x high power attenuators (30 dB, >10 W)
2x low power attenuators (30dB)
2x splitters
Sufficient cables and adaptors to connect the above devices to the radio units