Product Manual

Product Manual for Tornado Radio Unit
27
6.5.3 COMPLETE CALIBRATION OF ONE TX
Pressing Calibrate the 2nd time, finishes the adjustments and if successful, the following screen will be shown:
The user can abort the process at any time while still calibrating one of the Tx's by pressing the Abort button on
this screen or on other process screens. The abort isn't permitted once both transmitters show a green YES on the
last screen. This is one difference between CCMS and CLI which allows abort at any time unless you've already
issued a confirm.
6.5.4 COMPLETE BOTH TRANSMITTER CALIBRATION
The next page shows up when both transmitters were successful in their calibration.