Product Manual

Product Manual for Tornado Radio Unit
36
Assembled and exploded view of the Tornado rack mount
8.1.1.2 Pole Mount
The pole mount kit can be used to mount the tornado onto a pole with a diameter between 23 and 51 mm. If the
tornado is mounted outside, then the weather proof hood must be used. Tools required are a #2 Philips screwdriver
and a 10 mm spanner.
Assembled and exploded view of the Tornado pole mount
8.1.1.3 Wall Mount
The wall mount kit can be used to mount the Tornado to an existing structure, or even to a large diameter wooden
pole. If the Tornado is mounted outside, then the weather proof hood must be used.
Tools required are a #2 Philips screwdriver, and R2 square drive. The supplied wall screws are of ‘Walldog’ type.
They do not require a drill bit for wood, but a 5mm drill bit will be required to insert the mounting screws into
concrete, brick or stone. A 5.5mm masonry bit may be required for especially hard material.