Product Manual

Product Manual for Tornado Radio Unit
37
Assembled and exploded view of the Tornado wall mount
8.1.1.4 DIN mount
The Tornado can also be mounted to a Top hat style DIN rail (EN 50022). Tools required are a #2 Philips
screwdriver.
Assembled and exploded view of the Tornado DIN mount
8.1.1.5 Weatherproof hood
The weatherproof hood can be used to protect the Tornado interfaces from dust or moisture ingress. It needs to
be used whenever the unit is mounted in an outdoor environment or in adverse conditions.
When installing the hood, orientate it so that the power label on the hood is on the same side as power label on
the radio unit. Do not over tighten the screws or glands. The Tornado then is to be mounted vertically with the
glands oriented downwards, as seen below.