User's Manual

Signal Meter
The Signal Meter provides a real time signal level in dBm for an
established link. It provides fine adjustment information to
optimize the aiming of the link to achieve the highest signal level
possible. The AP device and Station device must be first
configured with the same link info (SSID and security key).
frequency and distance values are displayed at the bottom of the page.
Current Tx MCS (Modulation and Coding Scheme) and Rx MCS rate
(if associated) corresponding Tx PHY (Physical Layer
Interface) rate and Rx PHY rate are shown.
The Center button locks the fine tuning scale in place, providing
more detailed granularity with the orange arrow showing the fine
grain level to assist in orienting and aiming the link.
Scrolling to the lower portion of the page, individual stream EVM
(Error Vector Magnitude) and RSSI (Received Signal Strength
Indication) levels are displayed. Current selected bandwidth,
Tools 13