User's Manual

Mimosa Backhaul Help Content

Mimosa Backhaul Mounting & Grounding

Remove the two nuts from the same side of the Pole Mount. Feed the bolts through the Bracket Assembly with2.

one bolt through the fixed hole, and the other bolt through the slotted arc. Thread the two nuts onto the bolts

on the outside of the Bracket Assembly, and then tighten loosely (some adjustment is required in a later step).

Slide the Pole Mount over the top of the pole as shown in the diagram, rotate the mount around the pole as3.

needed, and then tighten the bolts on the opposite side of the mount to secure. If the top of the pole is