Datasheet

Page 9-19
|
Specifications subject to change
HVAC SENSORS
Elements & Probes
Overview
These models feature fast-responding RTD or thermistor ele-
ments in aluminum cases (except stainless steel on S482PW)
with PTFE insulated leadwires. They can be assembled into
probes or used separately as all-purpose sensors.
Probes consist of elements assembled into stainless steel exten-
sion tubes. They are not suitable for direct fluid immersion but
may be used with thermowells. See Section 4 for thermowell
options.
See Section 5 for optional 4 to 20 mA temperature transmitters.
Specifications
Temperature range: -45.5 to 135°C (-50 to 275°F).
Leadwires: AWG 22, PTFE insulated. Standard lengths are 4",
12" and 18".
Moisture resistance: Meets MIL-STD-202, Method 104, Test
Condition B.
Insulation resistance: 1000 megohms min. at 500 VDC, leads
to case.
Model numbers
LEAD LENGTH 2.00"*
(50.8 mm)
0.188" (4.8 mm) DIAMETER
MODEL S482PW IS 2.4" (60.3 mm) LONG
LEAD LENGTH CASE LENGTH
0.250" (6.4 mm) DIAMETER 0.188" (4.8 mm) DIAMETER
1.0" (25.4 mm)
SENSING TIP
Specification and order options:
Elements
Probes
S411PB
Model number from table
60
Case length:
Specify in 0.1" increments
(Ex: 60 = 6.0 inches)
Minimum length is 3"
Z
Number of leads:
Y = 2 leads
Z = 3 leads (platinum only)
4
Lead length in inches
S411PB60Z4 = Sample part number
S458PD
Model number from table
Z
Number of leads:
Y = 2 leads
Z = 3 leads (platinum only)
4
Lead length in inches
S458PDZ4 = Sample part number
Element TCR
Ω /Ω/°C
Elements Probes
RTDs
Platinum 100 Ω ±0.1% at 0°C
0.00391 S402PB 411PB
Platinum 100 Ω ±0.1% at 0°C
(Meets EN60751, Class B)
0.00385 S458PD S460PD
Platinum 1000 Ω ±0.1% at 0°C
0.00385 S459PF S461PF
Platinum 1000 Ω ±0.1% at 0°C
0.00375 S482PW S485PW
Nickel-iron 1000 Ω ±0.12% at 70°F
0.00527 S400FB S409FB
Nickel-iron 2000 Ω ±0.12% at 70°F
0.00527 S401FC S410FC
HW 3000 Ω at -30.2°C
0.00262 S100057PX S100837PX
Thermistors
R25
¼R125
Thermistor 2,252 Ω ±1% at 25°C
29.2 TS438TA TS440TA
Thermistor 10,000 Ω ±1% at 25°C
23.5 TS439TB TS441TB
Specify and order products at:
www.minco.com/sensors_config