Datasheet

ManualsBrandsMinco ManualsSensor Elements (Analogue)Resistance Thermometer -200 °C 200 °C Pt100

Page 10-1

• Fast response surface sensing in aerospace, medical, and industrial devices

• Thin, flexible RTDs and thermocouples offer easy, non-invasive installation

• Rugged laminated construction for use in extreme environments

• Polyimide, silicone rubber, Mylar™ insulation

Thermal-Ribbons™.........................................................................10-2 to 10-3

Thermal-Tabs™..................................................................................10-2 to 10-3

Discoil™ Thermal-Ribbons ..........................................................................10-4

Strip sensing Thermal-Ribbons ...............................................................10-5

Thermistor Thermal-Ribbons....................................................................10-6

Thermocouple Thermal-Ribbons...........................................................10-6

Installation and accessories.......................................................................10-7

Non-invasive sensors design kit .............................................................10-8

SECTION 10: THERMAL-RIBBONS™

Summary of content (8 pages)

PAGE 1
S E C T I O N 1 0 : T H E R M A L- R I B B O N S ™ • Fast response surface sensing in aerospace, medical, and industrial devices • Thin, flexible RTDs and thermocouples offer easy, non-invasive installation • Rugged laminated construction for use in extreme environments • Polyimide, silicone rubber, Mylar™ insulation Thermal-Ribbons™.........................................................................10-2 to 10-3 Thermal-Tabs™............................................................................
PAGE 2
Thermal-Tab™ and Thermal-Ribbon™ Sensors Install these compact sensors anywhere for accurate point sensing and fast response. All Thermal-Tab modules use a thin-film RTD element. All Thermal-Ribbon models conform to EN60751 Class B tolerance when ordered with a PD platinum element.
PAGE 3
Specifications, continued Specification and order options S17624 Model number from table Leave blank PD Sensing element from table T = PTFE insulated wires K = Polyimide insulated wires Z Number of leads: Y = 2 leads Z = 3 leads (N/A on S25, S38) X = 4 leads (N/A on S25, S38 or S665/S667) Sensing elements T Leadwire insulation code from table at left Sensing element specifications** Platinum (0.00385 TCR) 100 Ω ±0.12% at 0°C (EN60751, Class B) Platinum (0.00385 TCR) 100 Ω ±0.
PAGE 4
Discoil™ Thermal-Ribbons Overview Install these compact sensors anywhere for accurate point sensing. Discoil™ RTD elements are wound on a single plane for faster time response. Specifications Dimensions W x L x Tmax 0.79 x 1.87 x 0.055" (20 x 47.5 x 1.4 mm) solder pad version shown 1.00 x 1.25 x 0.090" (25.4 x 31.8 x 2.
PAGE 5
Strip Sensing Thermal-Ribbons™ Overview These models average temperatures along their length to eliminate point measurement errors. Wrap them around cylinders or adhere them to flat surfaces. Specifications Dimensions W x L x Tmax Element Insulation options 0.375 x 4.00 x 0.075" (9.5 x 101.6 x 1.9 mm) PB22 PD12 PE22 0.375 x 4.00 x 0.065" (9.5 x 101.6 x 1.7 mm) 0.50 x 1.25 x 0.050" (12.7 x 31.8 x 1.
PAGE 6
Thermistor Thermal-Ribbons™ Overview Model TS665 and TS667 offer extremely sensitive NTC thermistors for applications with small temperature changes. Model TS667 also features waterproof construction, making it suitable for continuous immersion. Specifications Dimensions W x L x Tmax Element Insulation options 0.20 x 0.47 x 0.079" (5.0 x 12.0 x 2.0 mm) 0.20 x 0.60 x 0.118" (5.0 x 15.2 x 3.0 mm) Temperature Leadwires range Polyimide with elastomer cover coat TF, TK AWG 26, PTFE insulated 0.8 sec.
PAGE 7
Thermal-Ribbon Installation and Accessories Pressure sensitive adhesive PSA (option B in part number) is the simplest mounting method, but it is restricted to flat surfaces and temperatures below 177°C (350°F). PSA is usually factory applied to the mounting surface of the Thermal-Ribbon. To install, just remove the backing paper and press in place. #20 stretch tape High temperature silicone rubber tape for mounting ThermalRibbons to pipes or other cylinders as shown above.
PAGE 8
Non-Invasive Sensors Design Kit Non-Invasive Sensors Design Kit The Non-Invasive Sensors Design Kit will make you look at temperature sensing in a whole new way. Learn and develop new techniques for accurate and fast responding temperature measurement without disrupting the design integrity of your application. The Design Kit provides products and instructions to accurately sense temperature in places that would otherwise be difficult with traditional invasive sensing methods.