Datasheet

Page 10-6
|
Thermist or Thermal-Ribbons™
Dimensions
W x L x T
max
Element
options
Insulation Temperature
range
Leadwires Time
constant
Features Model
0.20 x 0.47 x 0.079"
(5.0 x 12.0 x 2.0 mm)
TF, TK
Polyimide with
elastomer cover coat
-50 to 125°C
(-58 to 257°F)
AWG 26,
PTFE insulated
0.8 sec. Small, low-cost TS665
0.20 x 0.60 x 0.118"
(5.0 x 15.2 x 3.0 mm)
Silicone rubber with
elastomer cover and
foil backing
AWG 24,
Silicone insulated
1.3 sec.
Waterproof,
suitable for continu-
ous immersion
TS667
Notes: T
max
is measured over the lead bulge.
TS665 is suitable for the CT325 temperature controller (page 5-20)
*Time constant is in water at 1 m/sec.
Specifications
Sensing elements
** See table above for element options on each model.
Sensing element specifications** Code
NTC thermistor 50k Ω ±1% at 25°C
TF
NTC thermistor 10k Ω ±1% at 25°C
TK
Thermocoupl e Thermal-Ribbon™
Specifications
Overview
Model TS665 and TS667 offer extremely sensitive NTC thermistors for applications with small temperature changes.
Model TS667 also features waterproof construction, making it suitable for continuous immersion.
Specification and order options
Note: PSA reduces temperature range to -20 to 177°C
(-4 to 350°F) and adds 0.005" (0.1 mm) to thickness.
TS665
Model number from table
TF
Sensing element from table
Y
Number of leads:
Y = 2 leads
40
Lead length in inches:
40" stocked, 60" maximum
A
Adhesive backing:
A = No adhesive
B = Pressure-sensitive adhesive (PSA)
N Compliancy:
C = RoHS compliant
N = RoHS non-compliant
TS665TFY40AN = Sample part number
Dimensions
W x L x T
max
0.75 x 0.75 x 0.065"
(19.1 x 19.1 x 1.7 mm)
Junction type E, J, K, or T
Insulation Polyimide
Temperature range -200 to 200°C (-328 to 392°F)
Leadwires AWG 24, solid PTFE insulated
Time constant 0.6 sec.
Features Surface mounting
Model TC40
Overview
TC40 is a patch-style thermocouple that adheres to all types of surfaces for quick and easy mounting.
Notes: T
max
is measured over the lead bulge.
*Time constant is in water at 1 m/sec.
Specification and order options
Note: PSA reduces temperature range to -20 to 177°C
(-4 to 350°F) and adds 0.005" (0.1 mm) to thickness.
TC40
Model number
J
Junction type:
E, J, K, or T
T
Covering over leadwires:
T = PTFE only
S = Stainless steel braid
36 Lead length in inches:
36" and 144" are stocked for type J, K, T
A
Adhesive backing:
A = No adhesive
B = Pressure-sensitive adhesive (PSA)
TC40JT36A = Sample part number
Specify and order products at:
www.minco.com/sensors_config