Programming instructions

WaveRider Operating Manual

109

SMR/THETA FOR 2 CHANNELS

SMRTHET2.CFG

Use the smr/theta for 2 channels configuration to evaluate the levels of SMR and Theta on

both sides of the brain.

1. From the FILE menu choose LOAD CONFIGURATION.

2. Select smrthet2.cfg.

3. Connect the electrodes as in the diagram. Use the cup electrodes supplied and the ten-

20 paste. Make sure that the skin is clean and you have a good contact.

4. Turn the WaveRider on by clicking the ON

button with your mouse or by using “Ctrl” +

“o”.

5. Both brain strip charts should have a clean signal if the electrodes are properly

connected.