Programming instructions

WaveRider Operating Manual

111

BETA/THETA FOR 2 CHANNELS

BETTHET2.CFG

Use the beta/theta for 2 channels configuration to evaluate the levels of Beta and Theta on

both sides of the brain.

1. From the FILE menu choose LOAD CONFIGURATION.

2. Select betthet2.cfg.

3. Connect the electrodes as in the diagram. Use the cup electrodes supplied and the ten-

20 paste. Make sure that the skin is clean and you have a good contact.

4. Turn the WaveRider on by clicking the ON

button with your mouse or by “Ctrl” + “o”.

5. Both brain strip charts should have a clean signal if the electrodes are properly

connected.