Programming instructions

WaveRider Operating Manual

113

ASSESSMENT

BRAIN REFLECTOR

REFLECTR.CFG

Use the Brain Reflector configuration to look at all of the frequencies on both sides of the

brain.

1. From the FILE menu choose LOAD CONFIGURATION.

2. Select reflectr.cfg.

3. Connect the electrodes as in the diagram. Use the cup electrodes supplied and the ten-

20 paste. Make sure that the skin is clean and you have a good contact.

4. Turn the WaveRider on by clicking the ON

button with your mouse or by “Ctrl” + “o”.

5. Both brain strip charts should have a clean signal if the electrodes are properly

connected.

6. With your eyes opened relax while remaining attentive. Drop your

shoulders.