Programming instructions

WaveRider Operating Manual

115

CHECKER

CHECKER.CFG

Use the checker configuration to evaluate the levels of the delta, theta, alpha and beta

brainwaves for setting threshholds and ranges on other configurations.

1. From the FILE menu choose LOAD CONFIGURATION.

2. Select checker.Cfg.

3. Connect the electrodes as in the diagram. Use the cup electrodes supplied and the ten-

20 paste. Make sure that the skin is clean and you have a good contact.

4. Turn the WaveRider on by clicking the ON

button with your mouse or by using “Ctrl” +

“o”.

5. Both brain strip charts should have a clean signal if the electrodes are properly

connected.