Programming instructions

WaveRider Operating Manual
125
Copyright 1997-2004 Jonathan Purcell
All Rights Reserved
SLIDER
The slider in the middle of the dialog box is an important indicator of how well your input
settings match the signal dynamics. The ends of the slider turn red when the signal exceeds
the settings in the current setup. The slider does not reflect the signal dynamics until the
apply
button is clicked. Clicking apply and observing the slider and sound output after
changing settings is a good habit to develop.
QUIET < MIN
The QUIET < MIN check box will cause the MIDI note to cease if the input value goes
below the lower parameter. If not checked the last note will continue to play when the input
parameter goes out of range.
QUIET > MAX
The QUIET > MAX check box will cause the MIDI note to cease if the input value goes
above the upper parameter. If not checked the last note will continue to play when the input
parameter goes out of range.
SOLO & PLAY ALL
SOLO mutes all MIDI voices except the voice being SOLOed
PLAY ALL unmutes all muted voices.