Programming instructions

WaveRider Operating Manual

136

There are five settings in the Ratio of Two Filters sub-dialog box:

Filter A:

Selects the frequency range of the digital filter to be used.

mS:

Defines the signal integration time in milliseconds for filter A. The default number of

milliseconds is the reciprocal of the center frequency. A multiple of this number will give the

best response.

Filter B:

Selects the frequency range of the digital filter to be used.

mS:

Defines the signal integration time in milliseconds for filter B. The default number of

milliseconds is the reciprocal of the center frequency. A multiple of this number will give the

best response.

% Ratio of A/B

: specifies the range of the ratios between filters A and B frequency range that

will be mapped to the MIDI, General Graph, ASCII and/or DDE output.