User's Manual

⋅ In the top right corner of the app click on the DFU button (on the right of “Disconnect”) and

select “Distribution Packet (ZIP)” from the proposed options

⋅ Get the new firmware file from where it was downloaded

⋅ Wait until the graph in the app has shown that 100% of the firmware was transferred, this

may take some minutes

⋅ Disconnect the Physilog® by clicking on “Disconnect” and close the tab of the Physilog 6S

⋅ Plug the Physilog® to the computer and update the date and time (see above)

iOS

⋅ Plug the Physilog® to the computer and update the date and time (see

above)

⋅ Install the “nRF Toolbox” on the iOS device

⋅ Download the latest firmware version from the email to the iOS device

⋅ Add the downloaded firmware to nRF Toolbox by connecting the iOS

device to the computer:

⋅ Open iTunes and select your phone

⋅ Select the “Apps” tab on the left and scroll down

⋅ Under “File Sharing” select the nRF Toolbox app and add the Firmware file to the Documents

list

Physilog 6S user manual v1.2.0 Date: 26.01.2021