Users Manual

NOTE: If you use Gait Up GO medical device for the first time, enable the Bluetooth connection from
the Mobile Phone and/or Tablet options.
NOTE: In order to enable updates, the mobile phone/tablet needs to be connected to the Internet by
using WiFi or mobile data.
NOTE: In order to login to the password protected part and generate reports, the Gait Up GO Mobile
Application needs to be connected to the Internet by using WiFi or mobile data.
4.3.3. Discover the Physilog®6 sensor device
Fig 5. Physilog6 sensor device inside its packaging
● Open the packaging delivered together with the Gait Up GO medical device
● Take the Physilog6 sensor device and the USB cable out from the packaging
● Connect the USB cable (USB-C side) to the Physilog6 sensor device
● Connect the USB-A part of the USB cable to a computer or to a mobile phone charger
compatible with the specifications listed in section 9 of the present document
● Make sure that the Physilog6 sensor device is fully charged (when battery charging is
complete, the LED on the Physilog6 sensor device body will shine green)
● When the charging is complete, the device is ready to be used.
Charging of the Physilog®6 sensor device
The Physilog6 sensor device is a wearable sensor powered by a Lithium-Ion rechargeable battery. It is
not possible to recharge the battery during the device operation. That is why, please check the battery
ENGLISH
26/84