Users Manual

1. SAFETY INFORMATION
The safety information is classified as follows:
Warning!
Clinical meaning: Refers to a hazard that, if not avoided, can result in serious injury or
death
General meaning: Advanced notice of something unpleasant or dangerous that will
happen
Caution!
Refers to a potential hazard that, if not avoided, can result in minor personal injury
and/or product/property damage
Read the following safety information before using this medical device.
1.1. Warnings
1.1.1. Warnings related to the operating conditions of the device
Do not use Gait Up GO medical device in the near proximity of Active Implantable Medical
Devices (AIMD), medical devices that have direct impact on the health condition of the patient
or life supporting medical devices.
Gait Up GO sensor device accessory, Physilog®6 sensor, should be handled carefully. In
particular, it should not receive intentional shocks, such as fall, crushing, being hit, etc.
Do not use or charge the Physilog®6 if the sensor, its case or USB cable are damaged. Contact
Gait Up about what further action is needed when any component is damaged.
Do not attempt to repair or modify the device or replace any of its components. For repair,
maintenance and replacements, please refer to Gait Up SA customer support. Damaged parts
must be immediately replaced with original parts by the customer service.
Do not use any external power supply (mobile phone charger) other than those compatible
with the technical specifications listed in section 9 of the present document. Always refer to
the device manual for proper charging instructions.
Use of accessories and cables other than those specified or provided by the manufacturer of
this medical device could result in improper operation of the device. Always refer to the
manufacturer indications.
Do not operate Gait Up GO medical device in an MRI room
ENGLISH
8/84