User's Manual

NetGuard™ Operating Instructions 0070-10-0678-01 5 - 5
Operations Introduction
To access the Patient Detail form from the NetGuard Monitor view:
1. In the NetGuard Monitor view, select the applicable Monitor Group tab.
2. Select an active patient or a patient in a Not Active or Lost Communication state. The
Patient Detail form is displayed.
To access the Patient Detail form from the Deferred Alarm Application Bar:
1. Right-click on any of the mini-alarm tiles contained in the Deferred Alarm Application
Bar.
2. Select View Details from the menu. The Patient Detail form is displayed.
NOTE: For alternative steps to accessing the Patient Detail form,
refer to “Accessing Monitor View Quick Menus” on
page 5-15.
5.1.3.1 HR Trend Tab
Select the HR Trend tab in the Patient Detail form to display a patient’s heart rate activity
over time. Trends can be viewed at different time periods by selecting one of the time interval
buttons below the trend graph. The choices are 24 hours, 8 hours, and the last hour. The HR
Trend tab is divided into two parts. The Summary Trend Graph and the Detailed Trend
Graph (both shown in FIGURE 5-4). Both are described in the following sections.
NOTE: Unless the patient is currently experiencing a Patient level
alarm, the HR Trend tab will automatically be selected when
the Patient Detail form is opened.
FIGURE 5-4 HR Trend Tab (30 minute trend interval)
Summary
Trend Graph
Window
Detail Trend
Graph
Window