User Manual

Demographics Tab Patient Setup Functions
5 - 16 0070-10-0690-01 Panorama™ Operating Instructions
• A checkmark in the ST filter box indicates that the ST analysis is enabled and the
Monitor filter is disabled.
4. Accept or reject the selections.
•The Done button accepts the selections.
•The Cancel button discards the selections, closes the dialog box and returns to the
Demographics tab.
5.1.3.5 Retrieving Discharged Patients
Select the Retrieve Discharged Pt. sidebar button to retrieve a patient from the discharge
list. A patient is only added to the discharge list if at least two of the three demographic fields
(First Name, Last Name, ID) were previously entered.
NOTE: The Retrieve Discharged Pt. sidebar button is not available
at the ViewStation or the WorkStation.
The Retrieve Discharged Patient Setting view (shown in FIGURE 5-13) provides a list
of the discharged patients that can be retrieved. The list has four columns labeled First Name,
Last Name, ID, and Discharge Time. Each row in the list contains at least two of the three
demographic indicators and the discharge time for a patient. The list displays the 15 most
recently discharged patients. When the next patient is added to the list, the oldest patient
data on the list is removed and permanently deleted from the system.
• A discharged patient can be retrieved into a patient tile that is not actively monitoring a
patient.
• A discharged patient can be retrieved into any patient tile that has an assigned device.
• A discharged patient can be retrieved into a tile assigned a different monitoring device
than was previously assigned to that patient.
Retrieving a discharged patient into a patient tile:
• Allows for active monitoring of the retrieved patient
• Restores Trend, Event, and Disclosure records
• Restores Wave Gain and Trend Display settings
• Restores patient’s alarm limit settings to reflect those at the bedside monitor
• Does not restore patient’s alarm limit settings when using a Telepack device
NOTE: If the destination device and the source device are different,
the source devices sensor display setup will be reset to the
system default settings of the destination device.
To retrieve a discharged patient:
1. Select the Retrieve Discharged Pt. sidebar button in the Demographics tab. The
Retrieve Discharged Patient Setting view (shown in FIGURE 5-13) is displayed.