User Manual

Panorama™ Operating Instructions 0070-10-0690-01 5 - 29
Patient Setup Functions Transfer Tab
Transfer List and the destination tile displays the recovered patient information, except
in the following situations:
•The No button terminates the recovery process and returns to the Transfer tab.
• Select the Cancel button to return to the Transfer tab.
Delete Failed Patient
When the Failed Transfer List has reached its maximum of five failed transfers, the Delete
Failed Patient sidebar button is used to delete patient information from the list.
The list box in the Delete Failed Transfer Patients view (shown in FIGURE 5-18) has
three columns labeled First Name, Last Name and ID. The list will contain at least two of
these three demographic indicators.
1. Select the Delete Failed Patient sidebar button. The Delete Failed Transfer
Patients view is displayed.
FIGURE 5-18 Delete Failed Transfer Patients View
2. Select the patient whose information is to be deleted from the list.
• Select the Delete button. The message Are you sure that you want to delete
this failed transfer? is displayed with the following choices:
NOTE: If the Yes button is selected, all of the patient’s data will be
unrecoverable. Once the patient is deleted from the list, the
patient will not be displayed in the Retrieve Discharged List
and therefore, cannot be retrieved.
• Selecting the Yes button when the Delete Failed Transfer Patient list is empty deletes
all of the selected patients data from the Failed Transfer List and then returns to the
Transfer tab.
• If the destination tile is in Standby mode when the recovery is complete, the
digital data displays but the waveform does not display. Upon returning to
normal monitoring mode, the waveform is displayed.
• If the destination tile is in a Communications Lost state when the recovery is
complete, the tile is blank and all buttons on the Transfer tab are unavailable.
The tile remains blank until communication has been re-established. Once
communication is re-established, the destination tile will populate with the
demographic information available at the destination bedside monitor.