User Manual

Panorama™ Operating Instructions 0070-10-0690-01 15 - 9
Paging Tab (Optional) Paging Tab
15.2.10 Generating a Paging Report
To review all of the currently assigned pagers, determine who each pager is assigned to,
and to which tile the pager is assigned, generate a Paging Report. This report can be
generated directly from the Paging tab by selecting the Print button from the Menu Bar.
For additional information regarding the Paging Report, refer to the ‘‘Paging Report’’ on
page 8-35.
15.2.11 Troubleshooting
This section lists some of the potential messages and issues that may occur while using the
Paging tab.
MESSAGE/ISSUE * REASON SOLUTION
You have reached the
maximum number of
pagers that can be
assigned to a tile.
A patient tile cannot be
assigned to more than 10
pagers.
Remove one pager assignment from
the patient tile.
The Add Tile button is
disabled.
There are no pagers listed in
the Paging tab’s list box.
Add a pager and then assign it to a
tile.
All the patient tiles at the
central station are already
assigned to the selected
pager in the Paging tab’s list
box.
Assign the pager to another patient
tile.
The Remove Tile button is
disabled.
There are no pagers listed in
the Paging tab’s list box.
Add a pager and then assign it to a
tile.
None of the patient tiles at the
central station are assigned to
the selected pager in the
Paging tab’s list box.
Assign a pager to one of the patient
tiles.
Are you sure you
want to Add All Tiles?
The Add All Tiles button
was selected in the Paging
tab’s list box.
Confirm that this was the intended
function, then select the Yes button
to confirm or the No button to cancel
the function and return to the
Paging tab.
Some tiles could not
be assigned to this
pager.
The Add All Tiles button
was selected.
Some of the patient tiles already
contain 10 pager assignments.
Are you sure you
want to Remove All
Tiles?
The Remove All Tiles
button was selected in the
Paging tab’s list box.
Confirm that this was the intended
function, then select the Yes or No
button.
Are you sure that you
want to delete the
selected event/s?
The Delete or Delete All
sidebar button was selected
while in the Failed Pages
view.
Confirm that this was the intended
function, then select the Yes button
or the No button.
The Done button in the
Pager Details dialog box is
disabled.
No data has been entered
into the Pager Number and/
or the Pag
er Assignment text
box.
Enter a Pager Number and/or Pager
Assignment in the Pager Details
dialog box.
* Messages are shown in all bold text.