User Manual

Quick Reference Guide Getting Started
2 - 22 0070-10-0690-01 Panorama™ Operating Instructions
5. A message dialog box is displayed.
a. If at least two of the three required demographic fields (First Name, Last Name,
Patient ID) are entered, the following message is displayed: Are you sure you
want to discharge this patient? Selecting Yes will move the patient to
the discharge list. The YES button discharges the patient. The NO button
continues monitoring the patient.
b. If at least two of the three required demographic fields are not completed, the
following message is displayed: The patient’s data and submitted print jobs
will be deleted because at least two of the following fields, First
Name, Last Name or ID have not been filled in. Do you still want to
proceed with the discharge? The YES button discharges the patient. The NO
button continues monitoring the patient.
To discharge a patient from a bedside monitor:
1. Select the DISCHARGE button on the front of the bedside monitor.
2. Select a discharge option.
•The Discharge From Monitor option erases all patient information at the bedside
monitor.
•The Discharge From Central option erases all patient information at the Panorama
Central Station.
•The Discharge From Both option erases all patient information at the Panorama
Central Station and at the bedside monitor.
NOTE: When using the Discharge From Central and Discharge From
Both options,
if two of the three demographic fields (First
Name, Last Name, and ID) have been completed prior to the
patient’s discharge, the patient is moved to the Discharge
list at the Panorama Central Station and may be retrieved.
NOTE: If a patient is discharged from the Panorama Central Station
but not from the patient monitor, the Panorama Central
Station tile will not be available for a new patient until a
discharge has been performed at the patient monitor.
3. Verify the selection. The Are you sure? confirmation dialog box is displayed.
•The Yes selection confirms the patient discharge.
•The No selection discards the patient discharge.
For additional information regarding discharging a patient, refer to "Discharging a Patient
from the Central Station and the Bedside Monitor’’ on page 5-36.
2.5.4 Display
The Display tab controls the order of patient data tiles and the waveforms that are shown on
the Main Screen.
To change the patient tile display order at an individual Panorama Central Station,
ViewStation, or WorkStation:
1. Select the Patient Setup menu button.
2. Choose a patient tile by selecting its digital data or waveform area.
3. Select the Display tab.