User Manual

Panorama™ Operating Instructions 0070-10-0690-01 5 - 3
Patient Setup Functions Demographics Tab
Once the correct "Patient Key" has been entered, communication with the EMR system must
be verified. Since the Panorama Gateway can be purchased with Admit/Discharge/Transfer
(ADT) messaging only, Results messaging only or ADT messaging with Results messaging,
this verification differs as follows:
ADT Messaging
For a Panorama Gateway that has ADT messaging, verify that communication with the EMR
system has been established as follows:
• If demographics information corresponding to the following fields was not part of the
“Patient Key” but was entered into the EMR system, these fields should auto-populate:
•ID #
• First name
• Last name
• Date of Birth
•Gender
• If the fields do not auto-populate, verify that the “Patient Key” was correctly entered and
that the patient demographics were entered in the EMR system. If the fields still do not
auto-populate after verification, contact the EMR administrator.
Results Messaging
For a Panorama Gateway that has Results messaging, verify that communication with the
EMR system has been established by checking the charting system to ensure that patient’s
vital signs data has been uploaded. If the charting system is not displaying this information,
contact the EMR administrator.
5.1.2 Accessing the Demographics Tab
1. From the menu bar, select the Patient Setup menu button. The Demographics tab is
displayed.
2. Choose a patient tile by selecting its digital or waveform area. The Demographics tab
is enabled.
FIGURE 5-1 Demographics Tab (Central Station using a Bedside Monitor device)