User's Manual

Getting Started Installing the Batteries
TM80/TM70 Telemetry Monitor Operator’s Manual 3 - 7
The TM80/TM70 is automatically powered on after the battery is installed.
3.4.2 Installing the AA Batteries
To install the AA batteries:
1. Make sure the battery compartment is empty.
2. Insert three 1.5V alkaline AA batteries according to the diagram in the bottom of
the battery frame as shown in the images below.
3. Align the hook on the upper part of the battery frame with the slot on the battery
compartment, as indicated by the enlarged part in the following figure.
Installing three AA batteries