User's Manual

Patient Management Discharging the Patient
TM80/TM70 Telemetry Monitor Operator’s Manual 5 - 5
5.6.2 Restarting the TM80/TM70
1. If the TM80/TM70 is powered off, press the key to turn on the device.
The device prompts whether this is a new patient or not.
2. Select [Ye s ] to enter the [Discharge Patient] confirmation menu.
3. Select [Ye s ] to clear the current patient’s configuration and start monitoring by
applying the user configuration.
If the TM80/TM70 does not save the user configuration, it will apply the default
departmental settings sent by the CMS for the new patient.