Instructions / Assembly

32
Main Detector Parts
Removable 1/4“ Headphone
Module*
Armrest Strap
Armrest
Armrest Lock
Handle
Control Panel
USB Connector
Trigger
Lower Shaft
Coil
Battery Pack†
Battery
Latches
Stand
Control Box
Control Box Latch
Upper Shaft
Cam Lock
WM 10
Wireless Audio Module*
Headphones*
* Not waterproof
† Waterproof only when attached
Attach Coil to Lower Shaft
1. Plug the two rubber washers into the
holes on either side of the lower shaft.
2. Feed the coil cable up through the inside
of the lower shaft.
3. Place the coil on a at surface and slide
the lower shaft into the bracket on top
of the coil. Ensure that the open side of
the lower shaft faces the rear of the coil.
Assembly
4. Insert the bolt through the lower shaft
and the bracket. Fasten with the nut
provided.
Attach Lower Shaft to Upper Shaft
1. Release the cam lock on the upper shaft
by pulling the lever away from the shaft.
Key Stop - Lower Shaft
Cam Lock -
Upper Shaft
2. The lower shaft can only be inserted into
the upper shaft in one orientation. Ensure
that the key stop on the lower shaft is
aligned to the upper shaft.
3. Slide the lower shaft into the upper shaft
until the coil cable and key stop appear
at the top.