Instruction manual

43
Modes Menu
CTX 3030 Instruction Manual
Activate Pinpoint
From the Map or Detect screens, press the trigger to activate Pinpoint; deactivate it
by releasing the trigger. The default operating mode is ‘Normal’.
Trigger
Change Pinpoint Type
1. From the Mode Settings menu, use the down arrow buttons to scroll to the
Pinpoint option and press Select.
The Pinpoint menu will be displayed.
2. Use the arrow buttons to highlight your required option and press Select.
3. You will be returned to the Mode Settings menu and your selection will be
displayed next to the Pinpoint option.
NOTE
Do not activate Pinpoint with
detector positioned over the
centre of the target or the whole
target may be masked.