Instruction manual

Tracking

For those models with Tracking Ground Balance, know that Tracking

allows your detector to constantly update the ground phase setting, on

the y. That means you don’t have to set your Ground Balance before

hunting as it will “set itself” within a couple sweeps. After a few sweeps,

you can either lock in the current ground phase setting by pressing the

Tracking pad again, or you can continue to hunt in Tracking.

Be aware that while in Tracking, repeated X-ing over a target might result

in your detector thinking that the target is part of the ground matrix.

If that happens, it could Ground Balance to the target instead of the

ground. Remember when I said Ground Balance was the simplest form

of discrimination? If you Ground Balance to a target, it could actually

discriminate that target out.

Now, with that said, once you start sweeping the coil, it will reset and

adjust itself to the “new matrix”, but you may have passed up a keeper in

the process.

Understanding your X-TERRA - Ground Balance











