Instruction manual
29
Also, both the 70 and 705, with 28 segments, will put all targets into one
of 28 TID segments. Those 28 segments represent two digit notches.
(Counting by two’s from -8 through +48).
So again, the dierence between the three models of the X-TERRA, as far
as TID is concerned, is the degree in which they can categorize targets.
The more notch segments available, the more specic the target
identication. If a Seated Liberty dime reads a 38 on the 705, what would
it read on the 505 or 305? Well, since neither the 305 nor the 505 have
a TID of 38 on their scale, it can’t read a 38. Since the 305 has four digit
notches, (numbers divisible by 4) I’d bet that same dime will read either
a 36 or 40 on it (kind of a toss-up since 38 is halfway between 36 and 40).
Considering the 505 has three digit notches (numbers divisible by 3), I’d
bet this dime will read a 39 on it. It might read a 36. But since it didn’t
read 36 on the 705, and was “categorized” into the number 38 notch on
the 705, I’d bet that this specic Seated dime will come in as a 39 on the
505 (38 is closer to 39 than 36).
Target ID Stability
Target ID Stability is a program incorporated into the functionality of the
705 which allows those hunting in highly mineralized soil to choose a
more accurate visual ID of the target. However, be aware that when using
TID Stability, the audio tone may not match your stabilized TID.
Understanding your X-TERRA - Discrimination
+