Instruction manual

67
66
error messages
1
1
1
2
3
4
5
AL
1
2
3
4
5
AL
Coil Unplugged
The coil has been
disconnected from
the detector.
Coil Error
The coil is not
communicating with
the control box.
Coil Incompatible
The coil is
communicating with
the control box but
the detector is not
recognising it.
1
1
1
2
3
4
5
AL
Overload
The detector has
received a signal that
is too strong for it
to interpret. This will
appear until there is no
more overload.
The menu scale
line icon will slowly
flash until the coil is
plugged back in.
Turn the detector off
before connecting a
standard coil.
Take the coil away
from the source of
overload.
Once all errors are resolved the
detector will begin operation with a
blank detection screen.
Coil identifiCation
The X-Terra Series are capable of operating
at dierent transmission frequencies set by
VFLEX compatible coils; Low (3kHz)*, Standard
(7.5kHz) and High (18.75kHz).
To view the type of coil:
Press Menu/Select
to enter the
settings screen.
Press and hold Accept/Reject
to view
the coil identication screen.
Release Accept/Reject
to return
to settings.
Press Pinpoint/Detect
to return to
detection.
The X-Terra Series operate with
Concentric (c) and Double D (d) coils.
Concentric
Standard
Frequency
Concentric
Low
Frequency
Concentric
High
Frequency
Double D
Standard
Frequency
Double D
Low
Frequency
Double D
High
Frequency