User's Manual

Personal Node User Manual Section 4 Working with the Personal Node
Rev: 1.1 18 / 70
© Minetec 2019
Table 5 Multi-function push button (defaults)
Scenario
Feature
Function
Action
Notes
Personal Node alarm is triggered by a
nearby vehicle or vehicles. User is
aware of all potential hazards and
wants to mute the alarm.
Proximity
event alarm
Mute
If permitted by HSE
and operational
procedures.
Momentary press
and release.
Muted alarms cannot be un-muted for that zone
however a new alarm is triggered by a closer threat.
For example, if the same vehicle moves to a closer
zone or a different vehicle enters the muted zone.
User wants to broadcast an alert to
vehicles.
Broadcast Me
mode
Activate
Press & hold for 1.5
seconds.
Broadcast Me alert is cancelled. See Use Broadcast
Me alert on page 35.
User wants to stop broadcasting an
alert to vehicles.
Broadcast Me
mode
Deactivate
User wants to enter a vehicle as a
driver or passenger and is within the
IVD approach range. The IVD alarm
annunciates.
IVD mode
Activate
Momentary press
and release twice
within 2 seconds.
Only effective if within the configured IVD range of a
vehicle. See Use In-Vehicle Detection (IVD) mode on
page 32.
User wants to exit a vehicle and be
alerted of any nearby vehicles. User
is within the IVD cancellation
range.
IVD mode
Deactivate
Manual deactivation to ensure Personal Node is
operational as soon as possible. See Use In-Vehicle
Detection (IVD) mode on page 32.
User wants to exit a vehicle and be
alerted of any nearby vehicles. User
is outside the IVD cancellation range
(eg forgot to cancel manually).
IVD mode
Deactivate
No action required.
Automatically deactivated when outside of the
configured IVD range of a vehicle in case user forgets
to deactivate manually.