User's Manual

Personal Node User Manual Section 4 Working with the Personal Node
Rev: 1.1 20 / 70
© Minetec 2019
Table 6 Function overview (defaults)
System
Function/Feature
In
Dock
Interface
Elements
Action/Behaviour
Purpose
Further reading
On charge
Yes
Charge LED
Solid red
Regular operations
on page 24
Fully charged
Solid green
Charge fault
Flashes red indicating, for example, a battery fault or dirty contacts.
Irregular operations
on page 26.
Start-up
sequence
No
All LEDs &
Audible alarm
1. Status + Charge flash blue once in synch with 2x red side LEDs.
2. All four LEDs flash red three times in synch & audible alarm.
3. Status LED flashes once every two seconds  Device OK.
Start-up sequence
on page 23
Device OK
Status LED
Flashes green, once every two seconds
Regular operations
on page 24
Low batt on
start-up
Flashes red.
Do not use a Personal Node with low battery at start-up as functionality is inhibited.
Irregular operations
on page 26
Low battery
Flashes orange, once per second
Faulty device
Flashes red.
Proximity event
detected
No
All LEDs
All LEDs flash in synch with audible alarms in Table 4 Basic default alarms on page 14.
Regular operations
on page 24
Mute alarm
Push button
Momentary press and release per Table 5 Multi-function push button (defaults).
Do not use a faulty device as functionality is inhibited.