User's Manual

Personal Node User Manual Section 4 Working with the Personal Node
Rev: 1.1 21 / 70
© Minetec 2019
IVD mode
Push button &
Status LED
Press button twice within 1.5 seconds  Status LED solid, any IVD audible alarm
mutes. See Table 5 Multi-function push button (defaults) on page 16.
Use In-Vehicle
Detection (IVD)
mode on page 32
Broadcast Me
alert
Push button
and all LEDs
Press and hold button for two seconds.  All LEDs flash white, an audible alarm
annunciates (if configured), and Broadcast Me alert broadcasts. See Table 5
Multifunction push button (defaults) on page 16.
Use Broadcast Me
alert on page 35