User's Manual

Section 6 About the Personal Node Charging
Personal Node User Manual
Dock
45 / 70
Rev: 1.1
©
c
Minete
01
2
9
Personal Node with standard loop
0.56
Default
Personal Node with swivel pin
0.60
Optional
Dock including 10x Personal Node
11.86
Fully laden charging dock.
M1010996 Wall Bracket Kit
0.3
2x 'T' type brackets.
2 spring nuts for EzyStrut E4000 channel.
EzyStrut E4000 Ribbed Channel,
41x21mm, 1.6mm thick (mild steel)
1.27 kg/m
Channel is not supplied by Minetec. M1010996
Wall Bracket Kit is compatible with this profile.
520 mm of EzyStrut E4000
0.66
Minimum length to suit a single dock.
At the time of writing, the load rating for EzyStrut E4000 Ribbed Channel (mild steel) is as shown in
Table 13 EzyStrut E4000 loads below. These loads and spans must be considered when installing the
channel. Multiple docks can be mounted on a single length of channel using appropriate mounting
points for the distributed load per the table below. The load values shown are in accordance with
Australian/New Zealand standard AS/NZS4600:1996, using a minimum yield stress for Fy of 210 MPa on
plain channel/strut. These results are based on a uniformly loaded, simply supported span. Deflection
has been calculated using standard formulae at the maximum permissible stress.
Table 13 EzyStrut E4000 loads
Span (mm)
Max. Allowable Load (kg)
Deflection at Allowable Load (mm)
250
350
0.31
500
175
1.22
750
116
2.76
1000
88
4.89
1250
70
7.65
1500
58
11.02
1750
50
15
2000
44
19.59
2250
39
24.82
2500
35
30.61
2750
32
37.04
3000
30
44.15