User's Manual

46 / 70
Rev: 1.1
©
c
Minete
01
2
9
Personal Node User Manual
Section 6 About the Personal Node
Charging Dock
Procedure 8 Wall mounting a dock
The Contractor needs to ensure that wall surfaces and mounting methods are suitable
to hold the loading from all fully laden Personal Node Charging Docks.
The Contractor is responsible for wall mounting.
If mounting multiple docks, read Wall mounting multiple docks on page 45, before
proceeding.
Follow these guidelines if the Personal Node Charging Dock (dock) is to be mounted on a wall using
the optional M1010996 Wall Bracket Kit. Keyholes in the mounting bracket permit a single person to
perform the install process.
Step
Action/Response
Comments
1) Prepare the
dock.
If powered on:
• Remove all Personal Nodes.
• Turn of the power.
• Disconnect the power source.
• Remove the power cable from the dock.
2) Remove the
feet.
• Lay the dock on a clear surface with the
larger baseplate (back) facing up and smaller
baseplate (bottom) facing you.
• Remove the four rubber feet from the larger
baseplate.
The feet are secured with
M4x16 (304 stainless steel)
socket cap screws.
3) Attach the
wall mount
brackets.
Lay each bracket on the larger baseplate with
the:
• Brackets as shown in Figure 20 'T' type wall
mount bracket on page 41 and mounted to
the dock as shown in Figure 19 Wall
mounting (exploded view) on page 40.
• Brackets flat on the baseplate with the knee
bend facing up.
• Two holes in the bracket spine (centre, top
and bottom) aligned with the two feet
mounting holes on the larger baseplate.
• The outer arm of each bracket extending
beyond the dock.
• Attach the brackets with the M4x16 stainless
steel socket cap screws and washers.
See Figure 17 Wall mounted -
front and Figure 18 Wall
mounted - side on page 40
showing the 'T' type bracket
(yellow) and EzyStrut E4000
channel (red).
The M4 screws are tightened
with 1.8 Nm torque setting
(dry).
The order from the outside is:
1) Screw head. 2)
Flat washer.
3) Spring washer.
4) Bracket.
5) Dock.
Section 6 About the Personal Node Charging
Dock