User's Manual

Personal Node User Manual
48 / 70
Rev: 1.1
©
c
Minete
01
2
9
9) Secure.
Tighten the pan head bolts to 6 Nm torque
setting (dry). The pan heads use a slotted driver.
It is essential that the dock is firmly
secured.
Section 6 About the Personal Node Charging
Dock
6.4 Wall mounting multiple docks
Multiple Personal Node Charging Docks can be mounted on a suitable wall surface in various
configurations; side-by-side and/or above/below.
The key considerations for mounting multiple charging docks are:
• Weight: Ensure the vertical wall(s) or frame(s) can support all docks when fully laden with 10
Personal Nodes each. See Load-bearing capacity on page 42.
• Power: Ensure sufficient power outlets and power supply for the all docks under full load. See
Table 11 Dock specifications on page 38.
• Cooling: Ensure sufficient ventilation/cooling for all docks. See Dock vertical mounting details on
page 38
• Accessibility: Personnel must have clear access to insert and remove Personal Nodes without the
need to lean, bend or stretch awkwardly. See Dock location on page 37.
Use the following diagrams to plan the installation of multiple units on a vertical surface.
Follow Procedure 8 Wall mounting a dock on page 43 for the wall mounting of a single Personal Node
Charging Dock.