User's Manual

Personal Node User Manual Section 8 Maintenance activities
Rev: 1.1 58 / 70
©
Minetec 2019
11)
Cleanliness, fan
vent
Check the fan vent for accumulation or accretions (mud,
dust etc). The dock will accumulate dust and debris from
the environment if not enclosed in a vented/filtered
enclosure.
Check internally if outside of vent
encrusted or particularly dirty.
Step
Check
Action
Remediation
Notes/References
The following steps may be performed by the electrican,
a maintenance technician or similar.
.
12)
Cleanliness, dock
body
Check the dock body for accumulation or accretions
(mud, dust etc).
If required, the outside surface can be
cleaned with a damp cloth.
Do not use any harsh abrasives,
liquids or detergents.
Do not wash with high pressure
water.
13)
Charging contacts
Check the charging contacts of the dock are clean and
clear of any accretions (mud, dust etc).
Clean the six charging contacts (per
charging bay) with cotton buds and
electrical contact cleaner. Refer MSDS
for electrical contact cleaner used at
your site.
DO NOT USE harsh abrasives
(eg sandpaper) or
conductive materials (eg
steel wool)
14)
Dock mounts and
fasteners
Check for missing, damaged or loose mounts and
fasteners.
Tighten any loose mounts or fasteners.
Replace any missing fasteners.
Wall mounting a single dock
on page 39.
Wall mounting multiple
docks on page 45.