User's Manual

Personal Node User Manual Section 9 Troubleshooting

63 / 70

Rev: 1.1

Minete

9.2 Personal Node Charging Dock troubleshooting

This could require, for example:

• A physical tag be attached to the dock identified as, eg 'tagged out of service'.

• Tagging to occur before using another dock.

• The dock unplugged and set aside.

• Report to the Supervisor, or equivalent, before starting your next scheduled task.

Table 16 Charging Dock troubleshooting table

Problem

Test

Action for failed test

Refer MSDS for electrical contact

cleaner used at your site.

4) Power LED off.

Power LED not working.

Check power cable, switch.

Replace fuse.

5) Fan not

working

Cannot hear the fan running. Check power

cable, switch.

Contact your Supervisor as the

fan may need to be replaced.

Nodes not

charging.

Battery fault or dirty charging contacts

Clean contacts on Personal Node

and dock.

If a dock is deemed to defective after using this troubleshooting table, tag the dock as

defective using the 'lock out, tag out' program used at your site.

Wear protective gloves if handling electrical contact cleaner and refer to the MSDS.