080P Mini Clock Camera with Wi-Fi SKU: HCMiniWiFiClock 1 Version 1.
THANK YOU FOR PURCHASING THE HCMINIWIFICLOCK Please read this manual before operating the HCMiniWiFiClock and keep it handy. Your purchase should include: 1 x HCMiniWiFiClock 1 x Manual 1 x MicroUSB to USB Cable 1 x AC Wall Charger 1 x MicroSD Card Reader 2 Version 1.
GET FAMILIAR WITH YOUR HCMINIWIFICLOCK 3 Version 1.
Version 1.
OPERATING YOUR DEVICE BEFORE YOU START 1. First you must download the Camvip app from the Google Play Store or the iPhone App Store. 2. If you wish to enable SD Card recording, you must insert a MicroSD card into the unit. 3. This device will only connect to 2.4 GHz Wi-Fi networks. Please contact your service provider to confirm your network is 2.4GHz. 4. We recommend using plug-in power with this device. Please remove the back cover of the device, and pull the plastic battery protector out.
HOW TO ADJUST CLOCK TIME 1. Power on the clock by pressing and holding the on/off button for 5 seconds. 2. When you power on your device, it will automatically be in 24-hour (military) time. To change it to 12-hour time, press the “Plus” or “Minus” symbols at the top. 3. To set the correct time, press the settings wheel “Time Set” once (see page 3 to help locate). a. The hour LEDs will flash. Press the “Plus” button until the current hour displays. b.
4. This device will also sync the correct time and date from your Wi-Fi router once you have successfully completed the 2-part connection. CONNECTING TO YOUR DEVICE DIRECTLY [PART 1] In order to view your camera feed remotely, you must first complete the following two-part sequence of steps. 1. The Wi-Fi will activate once you power your device. Remove the back cover to access the On/Off button, and press and hold the On/Off button for 5 seconds to power on your device. 2.
o You will be looking in your Wi-Fi settings for a network that looks like HCAMXXXXXX-XXXXX. 3. Once the device generates its Wi-Fi signal, connect to it via the Wi-Fi settings on your phone. NOTE: Some Android devices may produce a warning that the network has no internet access. If you see this, choose to connect to the network anyway. 4. After connecting to the Wi-Fi Signal with your mobile device, open the Camvip App.
6. Tap “Search (LAN)” and the UID signal of your device should appear below. 7. Tap on the UID signal that matches the sticker on your device, and all the camera’s information will be filled in. 8. Tap “OK” or “Add”. 9. Now you will see the app listed in the home screen of the app and it will show “Online”. You may now tap on this camera entry to test the video feed. NOTE: You will be prompted to change the device password the first time you view the camera video feed.
app, this password will be required to re-add the camera. If you forget the password, a factory reset will be required. In order to factory reset the device it will most likely need to be sent to us via an RMA (return merchandise authorization). If you have any questions regarding this please call us. CONNECTING THE DEVICE TO YOUR WIFI FOR REMOTE VIEWING [PART 2] 1. From the home screen of the app, tap the wrench icon on the right of the camera name. 2. A menu will pop up, choose “WiFi Config.
4. Select your network from the list of available networks. Then enter your WiFi password, and press OK. 5. A dialog will pop up to confirm the network name and password you entered. Make sure these are correct and then press OK. 6. The device will automatically reset. You will know the device has connected to your Wi-Fi successfully when the camera shows Connected in the home screen of the app. This may take up to 5 minutes. 7.
its own Wi-Fi signal and you should be connected to your own Wi-Fi. NOTE: If you still see a network broadcasting that is the named after the UID on the back of your device, connecting to your Wi-Fi has failed. Please repeat steps 3-7 above and pay careful attention to the network password you entered. 8. The device is now connected to your Wi-Fi and may be accessed from anywhere that your phone has an internet connection. HOW TO SET CAMERA SETTINGS 1. Open the live video stream of your camera. 2.
o Change the name of your device by selecting “Device Name”, entering the name you wish, and clicking “OK”. o Change the password for your device by selecting “Change Password”, entering the default password (888888), entering your new one, and clicking “OK”. You must keep up with this new password. o Set up motion detection alerts (see next section). o Set up MicroSD card settings by clicking “Micro SD Card Config,” and adjusting the recording mode, resolution, and file length. 4.
HOW TO SET UP MOTION DETECTION ALERTS 1. Open the app and select your device. Open your device settings. 2. Select “Alarm Config”. 3. Adjust the motion detection sensitivity according to your preferences. a. Note: We suggest starting in the middle, then adjusting as you need to. 4. Select how you would like to receive the alerts (email or app). 5. Make sure the alerts are selected “on”, then click “Confirm”. 6. You will now receive alerts when the camera detects motion.
RETRIEVE THE FILES TO YOUR PC 1. Remove the MicroSD Card from your device (see page 4 to locate the slot). Please ensure the device is off before doing so. Press and hold the On/Off button for 5 seconds to turn your device off. 2. Use the MicroSD card reader to connect the MicroSD card to your computer. 3. Locate “Removable Disk” inside the (My) Computer folder. AutoPlay Removable Disk > Open folder to view files 15 Version 1.
Or… Go to Start > Computer > Removable Disk 4. Open the Removable Disk drive. 5. Open the folder containing the files. 6. Double click the file you want to view. 16 Version 1.
TROUBLESHOOTING THE DEVICE WON’T TURN ON Make sure the device is charged. Make sure the MicroUSB cable is plugged all the way in to the device (the “Power Light” should light up when it is successfully connected). Make sure you have pressed and held the On/Off button for at least 5 seconds. CANNOT RECORD TO SD CARD Confirm you have inserted a MicroSD Card into the unit. See page 4 to locate the MicroSD card slot.
Open the back cover of the device, and locate the reset button. Turn on your device, wait 1 minute, press and hold the reset button for 10 seconds or until the back indicator lights turn off. CAN’T FIND DEVICE’S WIFI SIGNAL Please unplug the device, wait 30 seconds, plug your camera back in and try again. Try resetting the device. THE APP CANNOT FIND THE CAMERA AFTER CHOOSING “SEARCH/LAN” Ensure you are still connected to the device’s Wi-Fi signal by going to your phone’s Wi-Fi settings.
OTHER PROBLEMS Call our technical support at 770–694– 6921 19 Version 1.
SPECIFICATIONS Video Resolution Streaming Resolution Recording Resolution Video Format Type of Memory Memory Capacity Recording Capacity USB Interface Player Software Time Date Stamp Operating Systems 20 1080P, 720P, 480P 1080P, 720P, 480P 1080x720 AVI External MicroSD Card Up to 128GB 1GB ≈ 20 minutes 2.0 USB VLC Yes Windows 7 & Up Android 5.0 & Up Mac OSX 10.5 & Up Linux Version 1.
Version 1.
Version 1.
Version 1.
QUALITY CONTROL CHECKLIST ☐ HCMiniWiFiClock ☐ AC Adapter ☐ USB Cable ☐ Manual ☐ MicroSD Card Reader QC Tech: _______________________________________ Date: _______________________________________ 24 Version 1.
