Installation Guide

9
/
1 0
3. Connect Water Supply
1
2
3
Connect water supply line (new or existing) between shut off valve and tank
inlet water fitting. Tighten coupling nuts securely. NOTE: DO NOT
OVERTIGHEN
Turn on supply valve and allow tank to fill until float rises to shut off position.
Check for leakage at fittings, tighten or correct as needed.
Step 7. Connect the flexible water supply line (not included) to the shut off
valve. Tighten coupling nuts securely.
CARE AND MAINTAINANCE
1. Do not stand on the toilet cover, and do not place heavy objects on it. (Or else
it may cause crack)
2. Do not clean the toilet seat with household cleaners, volatile, thinner and
eradicator, or use nylon brush, and avoid cholorine-containing, corrosive and a
brasive cleaners. Maintain the shiny surface by using soft fabric and clean
water. (Or else it may cause abrasion or crack)
DO NOT