Use and Care Manual

13
CLEANING SAFEGUARDS
•
•
•
•
•
•
The blender bottles and threaded base unit should not be immersed in boiling
water for any reason, as this will warp the plastic and damage the gaskets.
The blade unit (threaded base unit and blade assembly) can be disassem-
bled on occasion for deep cleaning. To remove the blade assembly from the
threaded base unit, simply hold the threaded base unit with both hands and
push hard on the drive coupler with both thumbs, and the blade assembly will
snap out of the threaded base unit. Be careful, as the blades are sharp (fig 1).
Remove the clear sealing ring from around the blade assembly for cleaning (fig 2).
Wash the blade assembly only under running water.
Do not place in dishwasher (fig 3 & fig 4).
Air dry the threaded base unit, the clear sealing ring, and the blade assembly.
Once air dried, reassemble as per above assembly instructions.
Fig: 1 Fig: 2 Fig: 3 Fig: 4