Owner's Manual. MINI Coupe. MINI Roadster. MINI Convertible. Online Edition for Part no.
COOPER COOPER S JOHN COOPER WORKS Owner's Manual for Vehicle Thank you for choosing a MINI. The more familiar you are with your vehicle, the better control you will have on the road. We therefore strongly suggest: Read this Owner's Manual before starting off in your new MINI. It contains important information on vehicle operation that will help you make full use of the technical features available in your MINI.
© 2013 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. US English VI/13, 07 13 500 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling. Online Edition for Part no.
Contents The fastest way to find information on a partic‐ ular topic or item is by using the index, refer to page 214.
Notes Notes Using this Owner's Manual The fastest way to find information on a partic‐ ular topic is by using the index. An initial overview of the vehicle is provided in the first chapter. Additional sources of information Should you have any questions, your service center will be glad to advise you at any time. and special equipment offered in the model series.
Notes tain country you cannot lodge warranty claims for your vehicle there. Further information can be obtained from your Service Centre. Maintenance and repairs Advanced technology, e.g., the use of modern materials and high-performance electronics, requires suitable maintenance and repair methods. Therefore, have this work performed only by a MINI service center or a workshop that works according to MINI repair procedures with ap‐ propriately trained personnel.
Notes ▷ California Emission Control System Limited Warranty. Detailed information about these warranties is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models.
Notes Event Data Recorder EDR This vehicle is equipped with an event data re‐ corder EDR. The main purpose of an EDR is to record, in certain crash or near crash-like situa‐ tions, such as an air bag deployment or hitting a road obstacle, data that will assist in under‐ standing how a vehicle's systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.
WATCH ME. Online Edition for Part no.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no.
At a glance Cockpit Cockpit Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
At a glance Cockpit Instrument lighting 77 Steering wheel buttons, left Volume Trip odometer 65 Telephone 138 5 Windshield wipers 59 Change the radio station 6 Select a music track Start/stop the engine and switch the ignition on/off 55 7 Ignition lock 55 8 Steering wheel buttons, right Resuming cruise control 94 Scroll through the redial list 9 Horn, the entire surface 10 Adjust the steering wheel 49 11 Releasing the hood 169 Storing the speed and accelerat‐ ing or slowing down 94 Activati
At a glance Cockpit Displays 1 2 Tachometer 66 ▷ Flat Tire Monitor 83 with indicator and warning lamps 15 ▷ Tire Pressure Monitor 83 Display for ▷ Settings and information 68 ▷ Current speed 65 ▷ Personal Profile settings 21 ▷ Indicator/warning lamps 15 5 Instrument lighting 77 3 Resetting the trip odometer 65 6 4 Display for Speedometer with indicator and warning lamps 15 ▷ Automatic transmission position 62 7 Fuel gauge 66 ▷ Computer 66 8 Radio display ▷ Service requirements 70
Cockpit Indicator/warning lamps The concept At a glance Several of the lamps are checked for proper functioning when the engine is started or the ignition is switched on, and light up briefly. What to do in case of a malfunction A list of all indicator and warning lamps, as well as notes on possible causes of malfunctions and on how to respond, refer to page 196. The indicator and warning lamps can light up in a variety of combinations and colors in display area 1 or 2.
At a glance Cockpit Seat heating 46 MINI Convertible: central power window switch 32 Power windows 31 Front fog lamps 77 Rear fog lamp 77 Central locking, inside 25 All around the head‐ liner All around the shift/ selector lever 1 1 AUX-IN port/USB audio interface 132 2 Buttons in the center console 2 Indicator/warning lamps for the front pas‐ senger airbags 82 Switch panel Sport button 91 Reading lamps 78 MINI Roadster: interior lamps/ reading lamps 78 Driving stability control sys‐ tems
Cockpit Online Edition for Part no.
HANDLE ME. Online Edition for Part no.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no.
Controls Opening and closing Opening and closing Vehicle equipment mote control is used to unlock the vehicle, Per‐ sonal Profile, refer to page 21. This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Opening and closing Controls Personal Profile ▷ Headlamp courtesy delay feature, refer to page 76. The concept ▷ Daytime running lights, refer to page 75. You can set several of your vehicle's functions to suit your personal needs and preferences. ▷ Through Personal Profile, most of these set‐ tings are stored for the remote control cur‐ rently in use. ▷ While the vehicle is being unlocked, the re‐ mote control is recognized and the settings stored with it are called up and imple‐ mented.
Controls Opening and closing ▷ The welcome lamps, interior lamps, and ambient lighting are switched on and off. The setting is stored for the remote control cur‐ rently in use. ▷ The alarm system is armed or disarmed, re‐ fer to page 31. 1. Switch on the ignition, refer to page 55. Operating from the inside 2. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed. Via the button for the central locking system, refer to page 25.
Opening and closing 8. Press the button to select: ▷ Pressing the button once un‐ locks only the driver's door and the fuel filler flap. Pressing twice unlocks the entire vehicle. ▷ Pressing the button once un‐ locks the entire vehicle. 9. Press and hold the button until the display changes. The setting is stored for the re‐ mote control currently in use. Convenient opening Press and hold the button on the re‐ mote control. The power windows are opened.
Controls Opening and closing 4. Press the button repeatedly until the sym‐ bol and "SET" are displayed. The function is deactivated. 9. Press and hold the button until the display changes. The setting is stored. Switching on the interior lamps When the vehicle is locked: Press the button. You can also use this function to locate your ve‐ hicle in parking garages, etc. 5. Press and hold the button until the display changes. Unlocking the tailgate 6.
Opening and closing ▷ This device may not cause harmful interfer‐ ence, and Controls ▷ Press down the lock button of the front passenger door and close the door from the outside. ▷ this device must accept any interference re‐ ceived, including interference that may cause undesired operation. Convenient opening and closing Any unauthorized modifications or changes to these devices could void the user's authority to operate this equipment.
Controls Opening and closing but they are not theft-protected. The fuel filler flap remains unlocked. 4. Press the button repeatedly until the sym‐ bol and "SET" are displayed. Unlocking and opening doors ▷ Using the switch for the central locking sys‐ tem, unlock all of the doors at once and then pull the door opener above the arm‐ rest, or ▷ Pull the door handle on each door twice: the door is unlocked the first time and opened the second time.
Opening and closing The central locking system remains un‐ locked. Controls MINI Convertible 9. Press and hold the button until the display changes. The setting is stored. Tailgate Opening The tailgate pivots back and up when it opens. Ensure that adequate clearance is available be‐ fore opening. Provide edge protection Sharp or angular objects can hit the rear window while driving and damage the heating wires of the rear window. Provide edge protec‐ tion.
Controls Opening and closing 2. Press button 2 and fold the rear seat back‐ rest forward while guiding the safety belt. 3. Pull the handle, see arrow. The tailgate is unlocked. MINI Coupe Recessed grips on the inside trim of the tailgate can be used to conveniently pull down the tail‐ gate. MINI Convertible, MINI Roadster: emergency unlocking MINI Roadster Pull the handle in the cargo area. The tailgate is unlocked.
Opening and closing ▷ Starting the engine. ▷ MINI Convertible: Convenient closing and convertible top operation with the remote control for Comfort Access. ▷ MINI Coupe, MINI Roadster: closing the side windows. Functional requirements ▷ There are no external sources of interfer‐ ence in the vicinity. ▷ To lock the vehicle, the remote control must be located outside of the vehicle. ▷ The next unlocking and locking cycle is not possible until after approx. 2 seconds.
Controls Opening and closing Do not depress the brake or the clutch; other‐ wise, the engine will start. Starting the engine The engine can be started or the ignition can be switched on, refer to page 55, when a re‐ mote control is inside the vehicle. It is not nec‐ essary to insert a remote control into the igni‐ tion lock. Switching off the engine in cars with automatic transmission The engine can only be switched off with the selector lever in position P, refer to page 62.
Opening and closing Controls Alarm system ▷ During transport on car-carrying trains, at sea or on a trailer. The concept ▷ When animals are to remain in the vehicle. The enabled alarm system reacts to the follow‐ ing: ▷ Opening of a door, the hood or the tailgate. ▷ Movements inside the vehicle. ▷ Changes in the vehicle tilt, e.g., during at‐ tempts to steal a wheel or tow the car. ▷ Interruptions in battery voltage.
Controls Opening and closing The window opens until the switch is re‐ leased. ▷ Press the switch downward briefly. In the radio ready state and higher, the window opens automatically. Press again briefly to stop the opening procedure. To open the window by a crack, briefly press the switch downward twice in close succession. Closing Danger of pinching Monitor the closing process and make sure that the closing path of the window is clear; otherwise, injuries may result.
Opening and closing Opening and closing the sliding sunroof Controls ▷ At temperatures below +10 ℉/-12 ℃, do not move the convertible top or else dam‐ age could result. ▷ Do not leave the convertible top open for longer than one day while it is wet; other‐ wise, damage could be caused by the mois‐ ture. ▷ Do not place any objects on the convertible top; otherwise, they could fall during oper‐ ation of the convertible top and cause damage or injury.
Controls Opening and closing ▷ Ensure that cargo does not push against the cargo cover from underneath. ▷ Ensure that the tailgate is closed. Opening and closing the convertible top tinued in the desired direction by pushing or pulling the switch. ▷ The convertible top not locked, refer to page 196, indicator lamp lights up. Interruption Danger A convertible top that is not fully opened or closed is a source of danger.
Opening and closing windows; otherwise, the windows will not be lowered, and it will not be possible to open the convertible top. Controls Unlocking the convertible top 1. Release the screw, arrow, using the hex key and take it out. Convenient opening and closing Convenient operation is possible via the remote control, refer to page 22, and the door lock, re‐ fer to page 25.
Controls Opening and closing 4. Release the second screw, arrow, using the hex key to unlock the convertible top. 3. In the vehicle, pry out the cover in the mid‐ dle of the roof using the screwdriver. Closing the sliding sunroof 1. Insert the hex key into the opening de‐ signed for this purpose in the middle of the roof and press upward, arrow 1. 5. Take out the screw. 6. Lift the side frame slightly, arrow 1, and pull the sensor and cable forward out of the guide. 7.
Opening and closing MINI Convertible: wind deflector Controls Mounting and unfolding The wind deflector keeps air movements in the passenger compartment to a minimum when the convertible top is open and provides an even more comfortable ride, even at high speeds. Do not allow pointed object to come into con‐ tact with the wind deflector as these may dam‐ age the net. Do not place any objects on the in‐ stalled wind deflector. When stowing, make sure that the wind deflector is not damaged by objects.
Controls Opening and closing ▷ The convertible top pivots up when it is opened and closed. When moving the convertible top in places like garages, en‐ sure that there is a minimum height of 79 inches/2 meters; otherwise, damage could result. Push the unlocking lever to the middle of the wind deflector and fold up both halves. MINI Roadster: manual convertible top General information The fabric convertible top combines reliable weather protection with simple and convenient operation.
Opening and closing 4. Guide the convertible top to the rear. Controls 6. Turn the handle clockwise until it engages audibly. The convertible top is locked. If the convertible top was open for a lengthy period, it may be necessary to ap‐ ply greater force when locking the top. 7. Fold the handle back in. 5. Push down on the convertible top with some momentum until it engages audibly.
Controls Opening and closing ▷ The convertible top pivots up when it is opened and closed. When moving the convertible top in places like garages, en‐ sure that there is a minimum height of 79 inches/2 meters; otherwise, damage could result. ▷ When the rollover protection system is ex‐ tended, do not move the convertible top under any circumstances. ▷ Always carry out the convertible top move‐ ment to the end. Driving when the convertible top is not fully opened or closed may result in damage or injury.
Opening and closing Controls Opening The convertible top is locked. 1. Fold out the handle and turn it all the way to the end, arrow. If the convertible top was open for a lengthy period, it may be necessary to ap‐ ply greater force when locking the top. 4. Fold the handle back in. 5. Close the windows if necessary. Manual closing in case of electrical malfunction Only close the convertible top manually if there is an electrical malfunction 2.
Controls Opening and closing see arrow, all the way to the stop, approx. four to five turns. 2. Unfold the wind deflector, arrow. Installation Closing 1. Hold on to the convertible top frame and guide it to the windshield frame. 1. Insert the wind deflector with parts 1 facing back into the holders 2 on the rollover bars. 2. Fold out the handle and turn it counter‐ clockwise all the way to the stop. 3. Pull the convertible top onto the windshield frame. 4.
Opening and closing Controls Storage Fold up the wind deflector 1 and slide it into the storage pouch 2. The wind deflector can be stored on the rear storage shelf behind the seats, refer to page 108. Online Edition for Part no.
Controls Adjusting Adjusting Vehicle equipment Seat adjustment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Adjusting Controls Backrest tilt Pull the lever, arrow 1, and apply your weight to the backrest or lift it off, as necessary, ar‐ rows 2. Lumbar support You can also adjust the contour of the backrest to obtain additional support in the lumbar re‐ gion. The upper hips and spinal column receive sup‐ plementary support to help you maintain a re‐ laxed, upright sitting position. 1. Pull the lever on the back of the seat up‐ ward, arrow 1. The backrest folds forward. 2.
Controls Adjusting Seat heating Although airbags enhance safety by providing added protection, they are not a substitute for safety belts. The shoulder strap's anchorage point will be correct for adult seat occupants of every build if the seat is correctly adjusted. One person per safety belt Never allow more than one person to wear a single safety belt. Never allow infants or small children to ride on a passenger's lap.
Adjusting Controls The shoulder strap's anchorage point will be correct for adult seat occupants of every build if the seat is correctly adjusted, refer to page 44. Head restraints Unbuckling the belt A correctly adjusted head restraint reduces the risk of spinal injury in the event of an accident. 1. Hold the belt firmly. 2. Press the red button in the belt buckle. 3. Guide the belt back into its reel.
Controls Adjusting Before transporting passengers Reinstall the head restraint before trans‐ porting anyone in the seat; otherwise, the pro‐ tective function of the head restraint is unavail‐ able.◀ Adjusting manually If an electrical malfunction occurs, for example, press the edges of the mirror glass. Folding the mirror in and out Turn the knob past the resistance point in di‐ rection 2. Mirrors The mirror can be folded in up to a vehicle speed of approx. 20 mph/30 km/h.
Adjusting Interior rearview and exterior mirrors, automatic dimming feature Controls 2. Move the steering wheel to the preferred height and angle to suit your seating posi‐ tion. 3. Fold the lever back. Do not use force to swing the lever back. Do not use force to swing the lever back up; otherwise, the mechanism will be dam‐ aged.◀ Two photocells are used for control: ▷ In the mirror frame, see arrow. ▷ On the back of the mirror. For proper operation: ▷ Keep the photocells clean.
Controls Transporting children safely Transporting children safely Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Transporting children safely and side airbags on the front passenger side are deactivated. Controls MINI Coupe, MINI Roadster Deactivating the front passenger airbags If a child restraint fixing system is used in the front passenger seat, the front passenger airbags must be deactivated; otherwise, there is an increased risk of injury to the child when the airbags are triggered, even with a child re‐ straint fixing system.
Controls Transporting children safely 3. Allow the belt webbing to be pulled in com‐ pletely. Guide the safety belt to the holder on the headliner. MINI Convertible: LATCH child restraint fixing system LATCH: Lower Anchors and Tethers for Children.
Transporting children safely Controls There is one additional mounting point for child restraint fixing systems with an upper retaining strap, arrow.
Controls Transporting children safely Attaching the upper retaining strap to the mounting point MINI Coupe 1. Remove the front cargo cover, refer to page 103. 2. Slide the head restraint upward. 3. Guide the upper retaining strap between the supports of the head restraint. 4. Attach the upper retaining strap to the mounting point with the hook. 5. Slide the head restraint into the bottom po‐ sition. 6. Pull the upper retaining strap taut.
Controls Driving Driving Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Automatic transmission You can only take out the remote control if transmission position P is engaged: interlock.
Controls Driving To save battery power when the engine is off, switch off the ignition and any unnecessary electronic systems/power consumers. Do not wait for the engine to warm-up while the vehicle remains stationary; start driving right away, but at moderate engine speeds. Radio ready state and ignition off Do not depress the accelerator when starting the engine. All indicator and warning lamps in the displays go out.
Driving Engine stop Handbrake General information The concept Take the remote control with you Take the remote control with you when leaving the vehicle so that children, for exam‐ ple, cannot operate the windows and injure themselves.◀ Set the handbrake and further secure the vehicle as required Set the handbrake firmly when parking; other‐ wise, the vehicle may roll.
Controls Driving Turn signal, high beams, headlamp flasher This function can be activated or deactivated: 1. Switch on the ignition, refer to page 55. 2. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed. 1 Turn signal 2 Switching on the high beams 3 Switching off the high beams/headlamp flasher Turn signal 3. Press and hold the button until the display changes. 4. Press the button repeatedly until the sym‐ bol and "SET" are displayed.
Driving Controls Switching on wipers ▷ Turn signal flashes once. Press the wiper lever upward, arrow 1. Triple turn signal. The lever automatically returns to its initial po‐ sition when released. ▷ 9. Press and hold the button until the display changes. The setting is stored for the remote control cur‐ rently in use.
Controls Driving Activating intermittent wipe or rain sensor 5. Press and hold the button until the display changes. Press the button, arrow 3. The symbol is shown in the tachometer. Setting the sensitivity of the rain sensor 1. Switch on the ignition, refer to page 55. 2. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed. 6. Press the button to select the desired sensi‐ tivity. 7. Wait or hold the button until the display changes. The settings were stored.
Driving Controls Do not use the washing facilities when the hood is open Only use the washing facilities when the hood is fully locked; otherwise, the headlamp washer system may become damaged.◀ Windshield washer nozzles The windshield washer nozzles are heated au‐ tomatically while the engine is running or the ignition is switched on. Washer fluid General information Antifreeze for washer fluid All washer nozzles are supplied from one reser‐ voir. The recommended minimum filling quantity is 0.
Controls Driving Reverse gear Changing selector lever positions Select only when the vehicle is stationary. When the gearshift lever is pressed to the left, a slight resistance needs to be overcome. ▷ With the ignition switched on or the engine running, the selector lever can be moved out of position P. Automatic transmission with Steptronic In addition to the fully automatic mode, gears can also be shifted manually using Steptronic, refer to page 63.
Driving Under normal operating conditions, fuel con‐ sumption is lowest when you are driving in po‐ sition D. Controls Kickdown The vehicle only shifts up or down at appropri‐ ate engine and road speeds, e.g., it does not shift down if the engine speed is too high. The selected gear is briefly displayed in the instru‐ ment panel, followed by the current gear. Kickdown is used to achieve maximum driving performance. Press on the accelerator beyond the resistance point at the full throttle position.
Controls Driving Manually unlocking the selector lever lock If the selector lever is locked in position P al‐ though the ignition is switched on, the brake is depressed, and the button on the selector lever is pressed, the selector lever lock can be over‐ ridden: 1. Switch off the ignition. 2. Unclip the sleeve of the selector lever. 3. Pull the sleeve up over the selector lever until the sleeve is inside out. Pull off the plug-in cable connector if nec‐ essary. 4.
Displays Controls Displays Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Odometer, external tem‐ perature display, clock At a glance Trip odometer To display the trip odometer: briefly press knob 3.
Controls Displays Tachometer ▷ The remaining LEDs change from orange to red, arrow. ▷ The remaining range is shown on the tach‐ ometer. ▷ When a dynamic driving style is used, such as when corners are taken rapidly, engine functions are not ensured. A warning lamp lights up below a range of ap‐ prox. 30 miles/50 km. Refuel promptly It is imperative that you avoid engine speeds in the red warning field. In this range, the fuel supply is interrupted to protect the engine.
Displays Controls Information in detail Range Displays the estimated cruising range available with the remaining fuel. It is calculated based on your driving style over the last 18 miles/30 km. Average fuel consumption This is calculated for the period during which the engine is running. To reset the average consumption: press the button on the turn indicator lever for ap‐ prox. 2 seconds. Current fuel consumption Displays the current fuel consumption.
Controls Displays Settings and information Symbol Function Initialize the Flat Tire Monitor, refer to page 83. Operating concept Some settings and information can only be cre‐ ated or opened while the ignition is switched on, the vehicle is standing, and the doors are closed. Resetting the Tire Pressure Monitor, refer to page 86. Set the formats and units of measure, reset to the factory settings, refer to page 69. Personal Profile settings, refer to page 21. 1 Button for: Exit the menu.
Displays Next setting or information 1. Within a setting or information display, press the button on the turn indicator lever repeatedly until "NEXT" is displayed. 2. Hold the button down. Direct change to the next setting or piece of in‐ formation. Formats and units of measure Controls 4. Press the button repeatedly until the sym‐ bol and "SET" are displayed. 5. Press and hold the button until the display changes. 6. Press the button repeatedly until the sym‐ bol shown is displayed, arrow.
Controls Displays Resetting to factory settings The settings for formats and units of measure can be reset to the factory settings. The settings are stored for the remote control in use. 5. Press the button repeatedly until "RESET" appears on the display. 1. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed. 6. Press and hold the button until the display changes to the first setting option. The settings are reset. 2.
Controls Displays immediately after you start the engine or switch on the ignition. Possible displays The current service requirements can be read out from the remote control by the service spe‐ cialist. Displaying the vehicle check For certain maintenance operations, you can view the distance remaining or the due date for that operation in the tachometer. 1. Switch on the ignition, refer to page 55. 2. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed.
Controls Symbol Displays Function Exit the display, refer to page 68 Next setting or information, re‐ fer to page 69 The symbol indicates that Check Control messages have been stored. The Check Control messages can be displayed later. Check Control The concept The Check Control monitors vehicle functions and alerts you to any malfunctions in the sys‐ tems being monitored.
Displays Controls Viewing stored Check Control messages The stored Check Control messages can only be displayed while the driver's door is closed. 1. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed. 2. Press and hold the button until the display changes. 3. Press the button repeatedly until the corre‐ sponding symbol and "CHECK INFO" ap‐ pear on the display. 4. Press and hold the button. If there is no Check Control message, this is indicated by "CHECK OK“.
Controls Lamps Lamps Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Switch on the parking lamps if necessary, switch position 1.
Lamps When the daytime running lights are activated, the low beams are always switched on in switch position 3 when the ignition is switched on. The exterior lighting goes out automatically af‐ ter the vehicle is switched off. High beams/roadside parking lamps 1 Turn signal/roadside parking lamp 2 Switching on the high beams 3 Switching off the high beams/headlamp flasher To assist in parking, the vehicle can be illumi‐ nated on one side; note the country-specific regulations.
Controls Lamps 6. Press the button repeatedly until the sym‐ bol shown is displayed, arrow. 4. Press the button repeatedly until the sym‐ bol and "SET" are displayed. 7. Press and hold the button until the display changes. 5. Press and hold the button until the display changes. 8. Press the button to select: 6. Press the button repeatedly until the sym‐ bol shown is displayed, arrow. ▷ Daytime running lights are activated. ▷ Daytime running lights are deactivated. 9. Hold the button down.
Lamps Depending on the steering angle and other pa‐ rameters, the light from the headlamp follows the course of the road. Controls MINI Convertible Activating With the ignition switch on, turn the light switch to position 3, refer to page 74. To avoid blinding oncoming traffic, the Adap‐ tive Light Control does not swivel to the driver's side when the vehicle is at a standstill. When driving in reverse, Adaptive Light Control is not active.
Controls Lamps Reading lamps ▷ Press the button briefly: the brightness changes in stages. ▷ Press and hold the button: the brightness changes continuously. Interior lamps Switching the reading lamps on/off Press the switch. MINI Roadster with semi-automatic convertible top The interior lamps, the footwell lamps and the cargo area lamp are controlled automatically. To avoid draining the battery, all lamps inside the vehicle are switched off some time after the ignition is switched off.
Lamps Controls Press the switch forward: the color changes in steps. Press the switch back: the brightness changes in steps. Intermediate settings and intermediate colors are possible. For continuously changing colors of the ambi‐ ent lighting, press the switch forward for more than 10 seconds. Online Edition for Part no.
Controls Safety Safety Vehicle equipment Information on how to ensure the opti‐ mal protective effect of the airbags This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. ▷ Keep at a distance from the airbags.
Safety ▷ Never modify either the individual compo‐ nents or the wiring in the airbag system. This also applies to steering wheel covers, the dashboard, the seats, the roof pillars and the sides of the headliner.◀ Even when all instructions are followed closely, injury from contact with the airbags cannot be ruled out in certain situations. The ignition and inflation noise may lead to short-term and, in most cases, temporary hear‐ ing impairment in sensitive individuals.
Controls Safety Indicator lamp for the front passenger airbags The indicator lamp for the front passenger air‐ bags indicates the operating state of the front passenger airbags. The lamp indicates whether the airbags are ac‐ tivated or deactivated. ▷ The indicator lamp lights up when a child in a child re‐ straint fixing system in‐ tended for the purpose is properly detected on the seat. The airbags on the front passenger side are not acti‐ vated.
Safety Do not obstruct the area of movement Always keep the area of movement of the rollover protection system clear. In light acci‐ dents, you are protected by the fastened safety belt and, depending on the severity of the acci‐ dent, the belt tightener and the multi-level air bag restraint system.◀ Lowering Have the service center check the rollover pro‐ tection system after it is deployed unexpect‐ edly.
Controls Safety Do not initialize the system when driving with snow chains. There is a flat tire or a major loss in tire inflation pressure. 1. Start the engine, but do not start driving. 1. Reduce your speed and stop cautiously. Avoid sudden braking and steering maneu‐ vers. 2. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed. 2. Check whether the vehicle is fitted with regular tires or run-flat tires.
Safety Continued driving with a flat tire If continuing to drive with a damaged tire: 1. Avoid sudden braking and steering maneu‐ vers. 2. Do not exceed a speed of 50 mph/80 km/h. 3. At the next opportunity, check the inflation pressure in all four tires. If the tire inflation pressure in all four tires is correct, the Flat Tire Monitor may not have been initialized. In this case, initialize the system.
Controls Safety ▷ For a mounted wheel without TPM elec‐ tronics. 5. Press and hold the button until "RESET‐ TING" is displayed. ▷ When the TPM is disturbed by other sys‐ tems or devices with the same radio fre‐ quency. Resetting the system Reset the system after each correction of the tire inflation pressure and after every tire or wheel change. 1. Start the engine, but do not start driving. 2. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed. 6. Drive away.
Safety Do not continue driving without run-flat tires Controls Continued driving with a flat tire If continuing to drive with a damaged tire: Do not continue driving if the vehicle is not equipped with run-flat tires; continued driving may result in serious accidents.◀ 1. Avoid sudden braking and steering maneu‐ vers. When a low inflation pressure is indicated, DSC Dynamic Stability Control is switched on if nec‐ essary. 3. Check the air pressure in all four tires at the next opportunity.
Controls Safety Final tire failure Vibrations or loud noises while driving can indicate the final failure of the tire. Reduce speed and stop; otherwise, pieces of the tire could come loose and cause an accident. Do not continue driving, and contact your service center.◀ Malfunction The small warning lamp flashes in yel‐ low and then lights up continuously; the larger warning lamp comes on in yel‐ low. No flat tire can be detected.
Driving stability control systems Controls Driving stability control systems Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Controls Driving stability control systems Press the button until the DSC OFF indi‐ cator lamp lights up in the speedometer and DSC OFF appears in the tachome‐ ter. DSC is deactivated. Intervening measures to stabilize the vehicle and give it forward mo‐ mentum are no longer executed. When driving with snow chains or to rock the vehicle free of snow, it may be useful to deacti‐ vate DSC temporarily. To increase vehicle stability, activate DSC again as soon as possible.
Driving stability control systems Indicator/warning lamps The indicator lamp in the tachometer flashes: DTC is controlling the drive forces and brake forces. The indicator lamp lights up: DSC and DTC has failed. The indicator lamp in the speedometer lights up and TRACTION appears in the tachometer. Controls ▷ The engine responds more spontaneously to accelerator movements. ▷ The steering responds more directly. ▷ Cooper S, John Cooper Works: the engine sounds sportier when coasting.
Controls Driving stability control systems Notes on the car washes and care, refer to page 191. Automatic operation If the rear spoiler is retracted, it is in automatic mode when the engine is started. In this case, the system is initialized when the vehicle is set into motion; this may cause a short noise to be heard. Automatic extension: When the vehicle exceeds a speed of ap‐ prox. 50 mph/80 km/h.
Driving comfort Controls Driving comfort Vehicle equipment Controls This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. At a glance Cruise control The concept The system is functional at speeds beginning at approx.
Controls Driving comfort ▷ The transmission position D is disengaged. Display in the tachometer ▷ DSC intervenes. Maintaining, storing the current speed Press button 1 or button 3. The current speed is maintained and stored. It is displayed briefly in the tachometer. On downhill gradients, it may prove impossible to maintain the set speed if the engine braking power is insufficient. On uphill gradients, it may prove impossible to maintain the set speed if the engine power output is insufficient.
Driving comfort Avoid driving quickly with PDC PDC is a parking aid that can display ob‐ jects when the vehicle approaches them slowly, as is the case during parking maneuvers. Avoid driving toward an object quickly as the system may then be too late in issuing a warning for technical reasons.◀ Automatic operation Controls Malfunction The warning lamp lights up. PDC is mal‐ functioning or has failed. Have the sys‐ tem checked.
Controls Climate Climate Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Controls Climate Cooling function Temperature The passenger compartment can only be cooled with the engine running. The cooling function cools and dehumidifies the incoming air before reheating it as required, according to the temperature setting. The cooling function helps to prevent conden‐ sation on the windows or to remove it quickly. Depending on the weather, the windshield may fog up briefly when the engine is started.
Controls Climate Microfilter The microfilter traps dust and pollen. The mi‐ crofilter is changed by the service center during routine maintenance work. tion by filtering gaseous pollutants from the outside air. The service center replaces this combined filter during routine maintenance. Microfilter/activated-charcoal filter The microfilter traps dust and pollen.
Controls Climate Air volume, manual Press the – button to reduce the air volume. Press the + button to increase the air volume. The automatic mode for the air volume can be switched on again using the AUTO button. The air flow rate may be reduced or the blower may be switched off entirely to save on battery power. The display remains the same. Switching the system on/off Reduce the air volume by pressing the – button until the system is switched off. All displays go out.
Controls Climate Manual air distribution The flow of air is directed, as se‐ lected, to the windows, to the upper body area, or to the foot‐ well. The automatic mode for the air distribution can be switched back on using the AUTO button. Temperature Set the desired temperature in‐ dividually. The automatic climate control achieves this temperature as quickly as possible regardless of the season, using maximum cooling or heating power if necessary, and then maintains it.
Climate Controls Ventilation 1 Knob for continuous opening and closing 2 Nozzle for direction of air flow Opening/closing Turn the knob. Direction of air flow Pivot the entire nozzle. Online Edition for Part no.
Controls Interior equipment Interior equipment Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Ashtray The ashtray is located in one of the cupholders in the center console at the front.
Interior equipment total load of all sockets must not exceed 140 watts at 12 volt. Controls MINI Convertible Avoid damaging the sockets by attempting to insert plugs of unsuitable shape or size. Do not connect the charger to the socket Do not connect the battery charger to the socket installed in the vehicle at the factory as this could damage the battery.
Controls Interior equipment Rear cover 1. Pull the releases, arrow 1, on the left and right. 2. Pull the cover down out of the brackets, ar‐ row 2. MINI Coupe, MINI Roadster: throughloading opening Securing cargo Always secure transported snowboards or similar objects as they could otherwise endan‐ ger occupants during braking or swerving.◀ The figure shows an example of the cargo area of the MINI Coupe. 1. Open the through-loading opening from the passenger compartment. 2.
Interior equipment Enlarging the cargo area When the convertible top is closed, the cargo area can be enlarged. 1. Fold the convertible top upward, refer to Loading aid. Controls Locking the backrest Before taking along passengers in the rear, fold back the backrests. When folding back, ensure that the locks engage properly; otherwise, cargo could be catapulted forward into the passenger compartment during brak‐ ing maneuvers and swerving, endangering the occupants. The belt guide loop must be closed.
Controls Storage compartments Storage compartments Vehicle equipment ▷ Nets on the back of the front seat backrests and in the front passenger footwell. This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Storage compartments MINI Convertible, MINI Roadster: locking Lock the glove compartment using the integrated key of the remote control, refer to page 20. Controls Opening The lid is mounted on rails and can be fully opened by sliding it back and lifting. Closing Slide the lid forward. Ventilation Depending on the vehicle's equipment, the glove compartment can be ventilated and, if the cooling function is switched on, cooled.
Controls Storage compartments MINI Coupe, MINI Road‐ ster: rear storage shelf behind the seats This space can be used to store briefcases, for example. No heavy objects Only transport light and small objects on the rear storage shelf; otherwise, braking ma‐ neuvers and swerving may lead to a safety haz‐ ard due to objects flying about the passenger compartment. Only transport heavy luggage in the cargo area if it has been appropriately se‐ cured.
Storage compartments Online Edition for Part no.
DRIVE ME. Online Edition for Part no.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no.
Driving tips Things to remember when driving Things to remember when driving Vehicle equipment tion potential until after an initial breaking-in period. This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Things to remember when driving Closing the tailgate Drive with the tailgate closed Only drive with the tailgate closed; other‐ wise, passengers and other road users may be endangered or the vehicle may be damaged if an accident occurs or during braking or swerv‐ ing. In addition, exhaust fumes may enter the passenger compartment.◀ If, despite this, the vehicle must be driven with the tailgate open: ▷ Drive moderately. ▷ Coupe: close all windows.
Driving tips Things to remember when driving Braking safely The vehicle is equipped with ABS as a standard feature. Applying the brakes fully is the most effective way of braking in situations when this is neces‐ sary. The vehicle maintains steering responsiveness. You can still avoid any obstacles with a mini‐ mum of steering effort. Pulsation of the brake pedal and sounds from the hydraulic circuits indicate that ABS is in its active mode.
Things to remember when driving Driving tips When the vehicle is parked When using the automatic climate control, con‐ densation water develops that exits under‐ neath the vehicle. Therefore, traces of condensed water under the vehicle are normal. After the engine is switched off, the coolant pump may continue running for some time in the MINI Cooper S. This causes noises in the en‐ gine compartment. Online Edition for Part no.
Driving tips Loading Loading Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Loading Driving tips MINI Coupe, MINI Roadster MINI Convertible: MINI Convertible The maximum load is the sum of the weight of the occupants and the cargo. The greater the weight of the occupants, the less cargo that can be transported. Securing cargo Stowing cargo Lashing eyes in the cargo area ▷ Very heavy cargo: when the rear seat is not occupied, secure each of the outer safety belts in the opposite buckle.
Driving tips Loading MINI Convertible Rear luggage rack Notes A special rear rack is available as an optional accessory. It does not require a trailer hitch. Follow the installation instructions for the rear rack. Anchorage points Securing cargo ▷ Secure smaller and lighter pieces with tight‐ ening belts or straps. ▷ Secure larger and heavier pieces with cargo straps. Adhere to the information included with the cargo straps. ▷ Four lashing eyes are available for fastening the cargo straps.
Saving fuel Driving tips Saving fuel Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. General information Your vehicle contains advanced technology for the reduction of fuel consumption and emis‐ sions.
Driving tips Saving fuel Switch off the engine during longer stops Switch off the engine during longer stops, e.g., at traffic lights, railroad crossings or in traffic congestion. Fuel savings are already achieved after the en‐ gine is turned off for as little as 4 seconds. Automatic Engine Start/Stop Function The Automatic Engine Start/Stop Function auto‐ matically switches the engine off during a stop.
Saving fuel Online Edition for Part no.
ROCK ME. Online Edition for Part no.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no.
Entertainment Radio MINI Boost CD Radio MINI Boost CD Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. General information At a glance 1 Change the audio sources. 6 Display. 2 On/off, volume.
Radio MINI Boost CD Entertainment 11 CD slot. 12 Eject the CD. Representation in the Owner's Manual If only one menu item is displayed above the function button, press the middle of the button. "…" Identifies radio display texts used to select individual functions. Symbols on the display Menu navigation Radio and telephone functions can be opened using buttons on the radio and menus. Symbol Meaning Function is selected. Opening menu items Function is activated.
Entertainment Radio MINI Boost CD Adjusting the volume ▷ "BAL": left/right volume distribution. Turn the left knob. The setting is stored for the remote control currently in use. The sound settings are set globally for all audio sources. When a call is placed using the hands-free sys‐ tem, the audio sources are muted. Setting the treble, bass, and volume distribution Speed-dependent volume and volumes of PDC signal tone and gong 1.
Entertainment Radio MINI Boost CD ▷ "LANG": select the language of the dis‐ play texts. 2. "RESET" ▷ "CONSMP": change the unit of measure for the average fuel consumption. Estimated range ▷ "TEMP": change the unit of measure for the external temperature. The display shows the estimated distance that can be still be driven on the remaining fuel, taking into consideration the driving style over the last 18 miles/30 km. 5. Highlight the desired menu item and press the button. "RANGE" 6.
Entertainment Radio MINI Boost CD Automatically updating the stations with the best reception, AUTOSTORE In the FMA and AMA memory levels, stations are automatically stored according to their re‐ ception strength. If the AUTOSTORE function is not used, six stations can be manually stored in each of the FMA and AMA memory levels. 1.
Entertainment Radio MINI Boost CD HD Radio Technology manufactured under li‐ cense from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and Arc logos are proprietary trade‐ marks of iBiquity Digital Corp. Activating/deactivating digital radio reception 1. Press the button. 2. "TUNER" Operational displays ▷ "acquiring": the system is looking for digital stations. ▷ "No Signal": no digital stations are being re‐ ceived.
Entertainment Radio MINI Boost CD A phone number and the electronic serial number, ESN, are displayed. The electronic serial number is required for deactivation. Changing the channel using the buttons 4. To have the channels deactivated, call the phone number. Press the button for the corre‐ sponding direction. The next enabled channel is opened. Selecting and storing a channel Search 1. 1. Press the button. 2. "SAT" 3. "CAT" 4. Select the desired category. 5. Select the desired channel.
Radio MINI Boost CD Starting the CD player ▷ : press the right knob to close a di‐ rectory. A CD is contained in the CD player. 1. Switch on the car radio if necessary. 2. Press the button. Entertainment 3. Select other directories if you wish. 4. Highlight the desired track and press the right knob. 3. "CD" You can scroll through the directories during playback. Skipping to another track To change to the current track: Press the button repeatedly until the desired track is played.
Entertainment Radio MINI Boost CD CDs Using CDs ▷ Do not use self-recorded CDs with la‐ bels applied, as these can become detached during playback due to heat buildup and can cause irrepara‐ ble damage to the device. ▷ Only use round CDs with a standard diame‐ ter of 4.7 in/12 cm and do not play CDs with an adapter, e.g., single CDs; otherwise, the CDs or the adapter may jam and no lon‐ ger eject.◀ General malfunctions ▷ The CD players have been optimized for performance in vehicles.
Radio MINI Boost CD Entertainment USB audio interface Connecting At a glance It is possible to connect external audio devices. The sound is output on the vehicle loudspeak‐ ers. Connectors for external devices The AUX-IN port is in the center console. Connect the headphone connec‐ tor or line-out connector of the device to the AUX-IN port. Ensure that the connector is inserted all the way into the AUX-IN port. ▷ External audio devices, e.g. MP3 player: connection via AUX-IN socket.
Entertainment Radio MINI Boost CD Connecting After connecting for the first time Information on all music tracks, e.g. artist or type of music, as well as playback lists are transmitted into the vehicle. This may take some time, depending on the USB device and the number of tracks. During transmission, the tracks can be called up via the file directory. Number of tracks The USB audio interface is in the center console.
Radio MINI Boost CD Entertainment Random playback Notes "RND" Do not expose the audio device to extreme en‐ vironmental conditions, such as very high tem‐ peratures; refer to the audio device operating instructions. To end random playback: "RND" Selecting a track Depending on the connected device, the track can be selected via the following category: ▷ "LIST": playback lists. Depending on the configuration of the audio files, e.g.
CONNECT ME. Online Edition for Part no.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no.
Communication Telephone Telephone Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. At a glance This provides for better network reception and consistent sound quality.
Communication Telephone 5 Opens the main menu. 6 On/off, volume control. Symbol Meaning Display additional menu items. Scroll display. The list contains more than two entries. Menu navigation Reception of the wireless network: the display depends on the signal strength. Selecting menu items There are two ways to select a menu item on the display. Using the hands-free system. Roaming is active.
Communication Telephone 3. "PHONE" To delete the last digit: "DELETE" 4. "BT-ON" 11. "OK" To deactivate the connection again: Press twice if necessary. If pairing was successful, the mobile phone ap‐ pears on the radio display. 1. "BT" 2. "BT-OFF" 3. "YES" Four mobile phones can be paired with the ve‐ hicle at once. Pairing and connecting If pairing was unsuccessful: What to do if..., re‐ fer to page 141.
Telephone 5. Turn the right knob until the mobile phone to be connected is displayed. 6. "PRIO" mobile phone from the vehicle and pair and connect only one mobile phone. The mobile phone no longer reacts? Press the button repeatedly until the de‐ sired position is reached. Unpairing the mobile phone 1. Switch on the radio ready state or the igni‐ tion. 2. Communication Press the button. 3. "PHONE" 4. "BT" 5. Turn the right knob until the mobile phone to be unpaired is displayed.
Communication Telephone ▷ Dial a stored phone number, such as from the list of accepted calls. Accepting a call Briefly press the button on the steering wheel or radio. ▷ End the call. When the ignition and the radio ready state are switched off, such as after the remote control is removed, an existing call can be continued for up to 25 minutes on the hands-free system. Adjusting the volume or "YES" Rejecting a call "NO" Ending a call Briefly press the button on the steering wheel or radio.
Telephone ▷ "A-Z" Entries of the phone book of the SIM card or of the mobile phone, which consist of a name and phone number, are sorted in al‐ phabetical order. Communication Turn the right knob to display additional letters if necessary. 6. Turn the right knob to select the first letter of the entry. 7. Select the entry with the function button. ▷ "TOP8" The phone number is dialed. The Top 8 list contains the eight phone numbers that were dialed most frequently.
Communication Telephone Dialing a phone number stored in a list To select an entry and establish a connection: 1. Switch on the radio ready state or the igni‐ tion. 2. Press the button. 3. "PHONE" 4. Select a list, for instance "TOP8" 5. Turn the right knob to select an entry and press the knob to dial the phone number. Deleting an individual entry 1. Select an entry from the list. 2.
Telephone Snap-in adapter Communication 3. To remove the snap-in adapter: press but‐ ton 1. General information More information on compatible snap-in adapters that support the functions of the mo‐ bile phone is available at the service center. Notes At high temperatures, the charging function of the mobile phone may be limited and functions may not be executed. When using the mobile phone via the vehicle, note the operating instructions of the mobile phone.
Communication Telephone Removing the mobile phone Press the button and remove the mobile phone. 146 Online Edition for Part no.
Telephone Online Edition for Part no.
MOVE ME. Online Edition for Part no.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no.
Mobility Refueling Refueling Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. 2. Turn the fuel cap counterclockwise. 3. Place the fuel cap in the bracket attached to the fuel filler flap.
Refueling MINI Coupe, MINI Roadster: 1. Remove the cover of the left cargo area side wall. Mobility Observe the following when refueling When refueling, insert the filler nozzle com‐ pletely into the filler pipe. Lifting up the fuel pump nozzle during refueling causes: ▷ Premature pump shutoff. ▷ Reduced efficiency in the fuel-vapor recov‐ ery system. The fuel tank is full when the filler nozzle clicks off the first time. 2. Pull the green knob with the gas pump symbol.
Mobility Fuel Fuel Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Fuel recommendation Gasoline For the best fuel economy, the gasoline should be sulfur-free or very low in sulfur content.
Fuel Online Edition for Part no.
Mobility Wheels and tires Wheels and tires Vehicle equipment tires are warm, the tire inflation pressure is higher. This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Mobility Wheels and tires column for traveling speeds up to 100 mph/ 160 km/h to achieve optimum driving comfort. this speed; otherwise, tire damage and acci‐ dents may occur.◀ These tire inflation pressures can also be found on the driver's side door pillar when the driver's door is open.
Mobility Wheels and tires Tire size Pressure specifications in bar/PSI Compact wheel: T 115/70 R 15 90 M Traveling speed up to 50 mph/80 km/h 4.2/60 More details on the permissible load and weights, refer to page 212. Tire inflation pressures for MINI Cooper S Coupe Tire size Pressure specifications in bar/PSI All pressure specifications in the table are indicated in bar/PSI with cold tires. Cold = ambient temperature 195/55 R 16 87 V RSC 2.6/38 2.6/38 2.8/41 2.8/41 2.7/39 2.7/39 2.9/42 2.
Mobility Wheels and tires Tire inflation pressures for MINI Cooper Roadster Tire size Pressure specifications in bar/PSI All pressure specifications in the table are indicated in bar/PSI with cold tires. Cold = ambient temperature 175/65 R 15 84 T M+S 2.4/35 2.4/35 2.6/38 2.
Mobility Wheels and tires Tire size Pressure specifications in bar/PSI 205/45 R 17 84 V M+S RSC 2.8/41 2.8/41 205/45 R 17 84 V M+S A/S RSC 205/45 R 17 84 V RSC 205/40 R 18 82 W RSC 175/60 R 16 82 H M+S RSC More details on the permissible load and weights, refer to page 212. Tire inflation pressures for MINI John Cooper Works Roadster Tire size Pressure specifications in bar/PSI All pressure specifications in the table are indicated in bar/PSI with cold tires.
Mobility Wheels and tires Tire size Pressure specifications in bar/PSI 175/65 R 15 84 T M+S Std 2.4/35 2.4/35 2.6/38 2.6/38 175/65 R 15 84 H Std 175/65 R 15 84 H M+S A/S Std 175/60 R 16 82 H M+S RSC 195/55 R 16 87 H RSC 195/55 R 16 87 H M+S RSC 195/55 R 16 87 V M+S A/S RSC 205/45 R 17 84 V RSC 205/45 R 17 84 V M+S RSC 205/45 R 17 84 V M+S A/S RSC 205/40 R 18 82 W RSC More details on the permissible load and weights, refer to page 213.
Mobility Wheels and tires Tire inflation pressures for MINI John Cooper Works Convertible Tire size Pressure specifications in bar/PSI Traveling speeds of up to 100 mph/160 km/h Traveling speeds above 100 mph/160 km/ 2.7/39 2.7/39 2.9/42 2.9/42 2.9/42 2.9/42 3.1/45 3.1/45 All pressure specifications in the table are indicated in bar/PSI with cold tires.
Wheels and tires Conform to Federal Safety Requirements All passenger car tires must conform to Federal Safety Requirements in addition to these grades.◀ Mobility cle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum re‐ quired by law.
Mobility Wheels and tires Minimum tread depth In case of tire damage If there are indications of tire damage, re‐ duce your speed immediately and have the wheels and tires checked right away; other‐ wise, there is the increased risk of an accident. Drive carefully to the next service center or tire shop. If necessary, have the vehicle towed. Wear indicators in the tread base are distrib‐ uted around the circumference of the tire and are marked on the tire sidewall with TWI, Tread Wear Indicator.
Wheels and tires Changing wheels and tires Mounting Information on mounting tires Have mounting and balancing performed only by a service center or tire specialist. If this work is not carried out properly, there is the danger of subsequent damage and related safety hazards.
Mobility Wheels and tires Maximum speed of winter tires If the maximum speed of the vehicle is higher than the permissible speed for the winter tires, then display a corresponding sign in the field of vision. You can obtain this sign from the tire specialist or from your service center. Run-flat tires Label Maximum speed for winter tires Do not exceed the maximum speed for the winter tires; otherwise, tire damage and ac‐ cidents can occur.
Wheels and tires Mobility ▷ If a warning triangle or portable hazard warning lamp is required, set it up on the roadside at an appropriate distance from the rear of the vehicle. Comply with all safety guidelines and regulations.◀ The procedure to correct a flat tire depends on the equipment in the vehicle: ▷ Run-flat tires, refer to page 164. ▷ MINI Mobility System, refer to page 165.
Mobility Wheels and tires 3. Insert the sealant bottle into the compres‐ sor housing in a vertical position. 4. Unscrew the dust cap off of the valve of the defective wheel and screw the filling hose 2 of the sealant bottle onto the valve. If the inflation pressure of 1.8 bar/26 psi is still not reached, the tire is too heavily damaged. Contact the nearest service center. Stowing the Mobility System 1. Unscrew the filling hose 2 of the sealant bottle from the wheel. 2.
Wheels and tires Do not allow the compressor to run too long Mobility rily deactivate DSC or activate DTC, refer to page 89. Do not allow the compressor to run longer than 10 minutes; otherwise, the device will overheat and may be damaged.◀ If the inflation pressure is not maintained, take the vehicle on another drive, distributing the sealant, refer to page 166. Then repeat steps 1 to 4 once. If the inflation pressure of 1.8 bar/26 psi is still not reached, the tire is too heavily damaged.
Mobility Engine compartment Engine compartment Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Engine compartment To avoid damage, make sure that the wiper arms are resting against the wind‐ shield before you open the engine compart‐ ment. Do not open the engine hood before the engine has cooled down; otherwise, injuries may result.◀ Mobility Closing the hood Unlocking and opening the hood 1. Pull the lever. Close the hood from a height of ap‐ prox. 16 in/40 cm with momentum. It must be clearly heard to engage.
Mobility Engine oil Engine oil Vehicle equipment The oil level must be between the two marks on the dip stick. This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Engine oil Too much engine oil Have the vehicle checked immediately; otherwise, surplus oil can lead to engine dam‐ age.◀ Protect children Keep oil, grease, etc., out of reach of chil‐ dren and heed the warnings on the containers to prevent health risks.◀ Mobility Gasoline engine API SM or a higher quality standard Oil change An oil change should be carried out by the serv‐ ice center only. Oil types for refilling Notes No oil additives Do not use oil additives as these may cause engine damage.
Mobility Coolant Coolant Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. 2.
Maintenance Mobility Maintenance Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Mobility Maintenance Socket for OBD Onboard Diagnosis that fuel vapor is escaping; this will cause a dis‐ play to light up. If the filler cap is then tight‐ ened, the display should go out in a few days. Socket for Onboard Diagnosis The socket for Onboard Diagnosis may only be used by the service center, by work‐ shops that operate according to the specifica‐ tions of the vehicle manufacturer with appro‐ priately trained personnel, and by other authorized persons.
Replacing components Mobility Replacing components Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Mobility Replacing components MINI Coupe, MINI Roadster: replacing the wiper blades 4. Slide the new wiper blade onto the wiper arm until it engages audibly. 1. Fold up and hold the wiper arm. 5. Fold down the wiper arm. 2. Squeeze the locking spring, arrows 1, and fold out the wiper blade, arrow 2. Risk of damage Before opening the hood, ensure that the wiper arms with wiper blades are folded onto the window; otherwise, damage may occur.◀ Lamp and bulb replace‐ ment Notes 3.
Replacing components Use a clean tissue, cloth or something similar, or hold the bulb by its base.◀ Caring for the headlamps, refer to page 192. For bulb replacement that is not described here, please contact the service center or a workshop that works according to the repair procedures of the manufacturer with corre‐ spondingly trained personnel. Mobility driving cautiously with the front fog lamps, pro‐ vided this is permitted by local laws.
Mobility Replacing components 3. Insert the new bulb and attach the cover in reverse order. Turn signal, parking lamp, roadside parking lamp, and front fog lamp Access to the bulbs via the wheel housing Follow the general instructions on lamps and bulbs, refer to page 176. To remove the cover: 1. Press the tab. 2. Fold away the cover and take it out of the holder. Proceed in reverse order to attach the cover.
Replacing components Mobility 4. Turn the bulb counterclockwise and re‐ move it. 4. Turn the lower bulb counterclockwise and remove it. 5. Insert the new bulb and attach the covers in reverse order. 5. Insert the new bulb and attach the cover in reverse order. Replacing the parking lamp bulb and roadside parking lamp bulb 5-watt bulb, W 5 W 5-watt bulb, W 5 W Lateral turn signals 1. Push the lamp forward with the air grille and remove it. 1. Turn the wheel. 2. Remove cover 2.
Mobility Replacing components MINI Convertible 1. Remove the cover of the cargo area side wall. Move the convertible top to the top posi‐ tion, refer to page 104, and take off the cover of the cargo area side wall. 1 Turn signal 2 Tail lamp LED 3 Brake lamp Replacing MINI Coupe, MINI Roadster 1. Remove the cover of the cargo area side wall. 2. Turn the corresponding bulb counterclock‐ wise, arrows 1, and remove. Another bulb is located behind the cargo area side wall, arrow 2. 2.
Replacing components Mobility Replacing 1. Push the lamp to the left in the catch of the lamp housing using the screwdriver, ar‐ row 1. 1. Squeeze the clips, arrows, and remove the bulb holder. 2. Pull off the bulb and replace it. 3. Insert the new bulb and bulb holder in re‐ verse order. 4. Re-engage the bulb holder so that it audi‐ bly clicks into place. John Cooper Works: aerodynamic bumper The lamps are accessed via the rear side or the underside of the bumper. 2. Take out the lamp, arrow 2. 3.
Mobility Replacing components ▷ Tighten the lug bolts, refer to page 184. 5. Squeeze the locking spring. ▷ Drive with the compact wheel, refer to page 182. Removing the compact wheel The screw fitting of the compact wheel is lo‐ cated in the cargo area under the floor mat, on the floor of the storage compartment holding the wheel change set. 1. Release the screw fitting with the special wrench. 2. Take out the cover. 6. Lower the compact wheel with the lifting handle. 7.
Replacing components driving characteristics could result, for example reduced track stability on braking, extended braking distance, and altered self-steering characteristics in the limit range. In conjunction with winter tires, these characteristics are more pronounced.◀ Mobility Jacking up vehicle Only mount one compact wheel Only one compact wheel may be mounted. Restore the wheels and tires to their original size as quickly as possible. Failure to do so is a safety risk.
Mobility Replacing components 3. Mount the new wheel. 4. Screw in at least two bolts crosswise. 5. Screw in the remaining lug bolts. 6. Fully tighten all lug bolts in a diagonal pat‐ tern. 7. Lower the vehicle. tions and that any associated Check Control messages are no longer displayed. Charging the battery Note Do not connect the charger to the socket 8. Remove the jack. Retightening the lug bolts Retighten the lug bolts diagonally.
Replacing components Mobility Fuses Replacing fuses Never attempt to repair a blown fuse and do not replace a defective fuse with a substi‐ tute of another color or amperage rating; this could lead to a circuit overload, ultimately re‐ sulting in a fire in the vehicle.◀ Fuses should be replaced by the service center. Information on the fuses can be found on the inside of the covers. In the engine compartment Opening the cover Press the snap lock. In interior On the right side of the footwell.
Mobility Breakdown assistance Breakdown assistance Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Hazard warning flash‐ ers The first aid kit is located in the left side trim on the cargo area floor.
Breakdown assistance Do not touch live parts To avoid the risk of potentially fatal injury, always avoid all contact with electrical compo‐ nents while the engine is running.◀ Preparation 1. Check whether the battery of the other ve‐ hicle has a voltage of 12 volts and approxi‐ mately the same capacitance in Ah. This in‐ formation can be found on the battery.
Mobility Breakdown assistance the battery, or to the engine or body ground of the vehicle to be started. Body ground: Using a tow fitting The screw-in tow fitting must always be carried in the vehicle. It can be screwed in at the front or rear of the MINI. Tow fitting, information on use ▷ Use only the tow fitting provided with the vehicle and screw it all the way in. ▷ Use the tow fitting for towing on paved roads only. ▷ Avoid lateral loading of the tow fitting, e.g.
Breakdown assistance Mobility Towing with a tow bar Light towing vehicle The towing vehicle must not be lighter than your vehicle, or it will not be possible to control vehicle response.◀ Correctly attach the tow bar Only secure the tow bar on the tow fit‐ tings; damage can occur when it is secured on other parts of the vehicle.◀ Being towed Follow the towing instructions Follow all towing instructions, or vehicle damage or accidents may occur.
Mobility Breakdown assistance Towing with a tow truck Have the MINI transported with a tow truck with a so-called lift bar or on a flat bed. Do not lift the vehicle Do not lift the vehicle by the tow fitting or body and chassis parts; otherwise, damage may result.◀ Tow-starting If possible, do not tow-start the vehicle but start the engine by jump-starting, refer to page 186.
Care Mobility Care Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Car washes During the winter months Ensure that the vehicle is washed more frequently in winter.
Mobility Care ▷ Remove additional attachments, for in‐ stance a spoiler or telephone antenna, if there is a risk that these may be damaged. ▷ Insert the remote control into the ignition lock. Automatic transmission Before driving into the car wash, note the fol‐ lowing to ensure that the vehicle can roll: 1. Insert the remote control into the ignition lock, even with Comfort Access. Do not clean mirror glass with cleaners contain‐ ing quartz.
Care Caring for the convertible top The appearance and life of the convertible top depend on proper care and operation. Adhere to the following instructions: ▷ Do not fold the convertible top and stow it in the convertible top box while it is wet or frozen; otherwise, water marks, fabric stains, and chafing may occur. ▷ If water marks nevertheless occur on the headliner, these can be removed using a microfiber cloth and interior cleaner.
Mobility Care Upholstery material care Vacuum regularly with a vacuum cleaner to re‐ move superficial soiling. In case of heavy soiling, e.g., beverage stains, use a soft sponge or lint-free microfiber cloth in combination with a suitable interior cleaner. Follow the instructions on the container. Clean the upholstery material down to the seams using large sweeping motions. Avoid rubbing the material vigorously.
Care Mobility Only use floor mats that have been approved for the vehicle and can be properly fixed in place. Ensure that the floor mats are securely fastened again when they are returned after being re‐ moved, such as for cleaning.◀ Floor mats can be removed for cleaning. If they are very dirty, clean with a microfiber cloth and water or an interior cleaner. To pre‐ vent matting of the carpet, rub back and forth in the direction of travel only.
Mobility Indicator/warning lamps Indicator/warning lamps Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems.
Indicator/warning lamps 1 2 Mobility Cause How to respond The engine refuses to start. Depress the brake or clutch to start the engine, refer to page 56. The ignition is switched on and driver's door is open. Switch off the ignition, refer to page 55, or close the driver's door. The lights are still switched on. Switch off the lights, refer to page 74. The roadside parking lamps are still on. Switch off the roadside parking lamps, refer to page 75. A door is open. The hood is open.
Mobility 1 2 Indicator/warning lamps Cause How to respond Convertible top control failed! The convertible top position and lock cannot be detected. When the convertible top has been securely locked, you can continue driving. Close the convertible top/sliding sun‐ roof manually, refer to page 35. Have the system checked by the service center. Lights up in yellow: Convertible top drive overheated! Allow the convertible top drive to cool, refer to page 34. Sliding sunroof/convertible top.
Indicator/warning lamps 1 2 Mobility Cause How to respond The windshield washer fluid level is too low. Add washer fluid, refer to page 61, as soon as possible. Lights up in red: Service is due. Arrange a service appointment. Check the service requirements, re‐ fer to page 173. Lights up in yellow: The engine will start the next time the Start/Stop button is touched, possibly with‐ out the brake or clutch being depressed The remote control is malfunctioning or, in The engine cannot be started.
Mobility 1 2 Indicator/warning lamps Cause How to respond Indicator lamp 1 flashes: Engine malfunction under high load. High engine load will result in damage to the catalytic converter. You can continue your journey, but moderate your speed and exercise due caution. Have the vehicle checked immediately. Indicator lamp 1 lights up: Engine malfunction with adverse effect on emissions. You can continue your journey, but moderate your speed and exercise due caution.
Indicator/warning lamps 1 2 Cause Mobility How to respond Indication in US models The handbrake is set. Indication in Canadian models The handbrake is set. Indication in US models Release the handbrake. The handbrake is set while driving. Indication in Canadian models Release the handbrake. The handbrake is set while driving. Indication in US models Lights up in red: The brake fluid level is too low. Reduced braking effect, stop the car carefully. Contact the nearest service center.
Mobility 1 2 Indicator/warning lamps Cause How to respond Indication in US models The vehicle electronics have failed. You cannot continue your journey. Contact your service center. Indication in Canadian models The vehicle electronics have failed. You cannot continue your journey. Contact your service center. Lights up in red: Have the system in question checked immediately. The starter has failed or The engine cannot be restarted. Ignition malfunctioning.
Indicator/warning lamps 1 2 Cause Mobility How to respond Dynamic Traction Control DTC is activated, refer to page 90. Dynamic Stability Control DSC and Dy‐ namic Traction Control DTC are deacti‐ vated, refer to page 89. Driving stability limited during accel‐ eration and cornering. Dynamic Stability Control DSC and Dy‐ namic Traction Control DTC failed. Driving stability limited during accel‐ eration and cornering. Driving style must be readjusted.
Mobility 1 2 Indicator/warning lamps Cause How to respond Light up in yellow and red: A tire is deflated. Carefully bring the car to a stop. Ad‐ ditional information, refer to page 83. The Flat Tire Monitor was not initialized. Initialize the Flat Tire Monitor, refer to page 83. Light up in yellow: Flat Tire Monitor failed. Punctures are not indicated. Have the system checked.
Indicator/warning lamps 1 2 Mobility Cause How to respond Tire Pressure Monitor failed. Punctures are not indicated. Have the system checked. A wheel without TPM electronics is mounted. Have the system checked. Lights up in red: Transmission limp-home program active with restricted range of gears, possibly with reduced acceleration. You can continue your journey, but moderate your speed and exercise due caution. Have the system checked immediately.
Mobility 1 2 Indicator/warning lamps Cause How to respond The transmission is too hot. Avoid high engine loads. You can continue your journey, but moderate your speed and exercise due cau‐ tion. Selector lever position P not engaged. The vehicle is not secured against rolling. Selector lever position P not engaged. The ignition cannot be switched off. Engage selector lever position P when you wish to switch off the igni‐ tion, refer to page 55. The cruise control system has failed.
Indicator/warning lamps 1 2 Cause Mobility How to respond Lights up in red: The service appointment is overdue. Arrange a service appointment. Check the service requirements, re‐ fer to page 70. Lights up in yellow: Service is due. Arrange a service appointment. Check the service requirements, re‐ fer to page 70. No service due. The set speed limit was exceeded. The time and date are no longer correct. Set the time and date, refer to page 70. Online Edition for Part no.
FIND ME. Online Edition for Part no.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no.
Reference Technical data Technical data Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version. This also applies to safety-related functions and sys‐ tems. Engine specifications Displacement cu in/cm³ No. of cylinders Cooper Cooper S John Cooper Works 97.
Reference Technical data MINI Coupe Cooper Cooper S John Cooper Works Track width, front inches/mm 57.4/1,459 57.2/1,453 57.2/1,453 Track width, rear inches/mm 57.8/1,467 57.5/1,461 57.5/1,461 Wheelbase inches/mm 97.1/2,467 97.1/2,467 97.1/2,467 Smallest turning circle dia. ft/m 35/10.7 35/10.7 35/10.7 Cooper Cooper S John Cooper Works MINI Roadster MINI Roadster Width with mirrors inches/mm 74.5/1,892 74.5/1,892 74.5/1,892 Width without mirrors inches/mm 66.3/1,683 66.
Reference Technical data MINI Coupe Cooper Cooper S John Cooper Works Curb weight, road ready, with maximum special equipment Manual transmission lbs/kg 2,557/1,160 2,679/1,215 2,712/1,230 Automatic transmission lbs/kg 2,635/1,195 2,734/1,240 2,767/1,255 Approved gross vehicle weight Manual transmission lbs/kg 3,175/1,440 3,252/1,475 3,263/1,480 Automatic transmission lbs/kg 3,252/1,475 3,307/1,500 3,318/1,505 Manual transmission lbs/kg 1,786/810 1,885/855 1,896/860 Automatic t
Reference Technical data MINI Convertible Cooper Cooper S John Cooper Works Curb weight, road ready, with maximum special equipment Manual transmission lbs/kg 2,701/1,225 2,811/1,275 2,822/1,280 Automatic transmission lbs/kg 2,778/1,260 2,855/1,295 2,866/1,300 Approved gross vehicle weight Manual transmission lbs/kg 3,560/1,615 3,671/1,665 3,704/1,680 Automatic transmission lbs/kg 3,638/1,650 3,737/1,695 3,748/1,700 Manual transmission lbs/kg 1,863/845 1,951/885 1,973/895 Autom
Reference Everything from A to Z Everything from A to Z Index A ABS, Antilock Brake Sys‐ tem 89 Acoustic signal, refer to Check Control 72 Activated charcoal filter with automatic climate con‐ trol 100 Adaptive Light Control 76 Additives, engine oil 171 Airbags 80 Airbags, indicator/warning light 82 Air circulation, refer to Recir‐ culated air mode 97, 99 Air conditioner 96 Air conditioning 96 Air conditioning mode – Air conditioner 96 – Automatic climate con‐ trol 98 Air distribution – Automatic 99 – Ind
Reference Everything from A to Z C California Proposition 65 Warning 7 Car battery, refer to Vehicle battery 184 Car care products 192 Care, displays 195 Care, vehicle 192 Cargo area – Comfort Access 29 – Emergency activation, refer to Unlocking manually 27 – Emergency unlocking 28 – Opening from the out‐ side 27 Cargo area lamp, refer to Inte‐ rior lamps 78 Cargo area tailgate, refer to Tailgate 27 Car horn, refer to Horn 12 Carpet, care 194 Car phone, refer to Tele‐ phone 138 Car wash 191 CBC, Cornering
Reference Everything from A to Z Defroster – Rear window 97, 100 Defrosting windows 97 Defrost setting, refer to De‐ frosting windows 97 Dip stick, engine oil 170 Directional indicators, refer to Turn signals 58 Displacement, refer to Engine data 210 Display lighting, refer to In‐ strument lighting 77 Displays 14 Displays and controls 12 Displays, care 195 Displays, cleaning 195 Displays, refer to Instrument cluster 14 Disposal – Remote control battery 30 Distance warning, refer to Park Distance Control P
Reference Everything from A to Z F Failure messages, refer to Check Control 72 False alarm, refer to Avoiding unintentional alarms 31 Fastening safety belts, refer to Safety belts 46 Fault messages, refer to Check Control 72 Filling capacities 213 Filter – Refer to Activated-charcoal filter 98 – Refer to Microfilter 98 – Refer to Microfilter/acti‐ vated-charcoal filter with automatic climate con‐ trol 100 First aid kit 186 First aid, refer to First aid kit 186 Flashing when locking/unlock‐ ing 23 Flat tir
Reference Everything from A to Z I Ice warning, refer to External temperature warning 65 Icy roads, refer to External temperature warning 65 Identification marks, run-flat tires 164 Identification marks, tires 160 Ignition 55 Ignition key position 1, refer to Radio ready state 55 Ignition key position 2, refer to Ignition on 55 Ignition key, refer to Remote control with integrated key 20 Ignition lock 55 Ignition, switched off 56 Ignition, switched on 55 Indicator and warning lamps 15 Indicator and warnin
Reference Everything from A to Z Maintenance require‐ ments 173 Maintenance system MINI 173 Malfunction – Automatic transmission with Steptronic 64 – Convertible top 35, 41 – Door lock 25 – Fuel filler flap 150 – Tailgate 27 Malfunction warnings, refer to Check Control 72 Manual activation – Tailgate 27 Manual air distribu‐ tion 97, 100 Manual convertible top 38 Manual mode, automatic transmission with Step‐ tronic 63 Manual operation – Door lock 25 – Electrical convertible top 35, 41 – Selector lever loc
Reference Everything from A to Z Pressure warning, tires 83 Profile depth, refer to Mini‐ mum tread depth 162 Profile, tires 161 R Radio MINI Boost CD 124 Radio-operated key, refer to Remote control with integrated key 20 Radio ready state 55 Radio ready state, switched off 56 Radio ready state, switched on 55 Radio setting, refer to Radio ready state 55 Rain sensor 59 Range 67 Rear fog lamp 77 Rear fog lamp, bulb replace‐ ment 179 Rear lamps, refer to Tail lamps 179 Rear spoiler 91 Rearview mirror, refe
Reference Everything from A to Z Shift paddles on the steering wheel 63 Side airbags 80 Side windows, refer to Win‐ dows 31 Slot for remote control 55 Snap-in adapter, mobile phone 145 Socket, OBD Onboard Diagno‐ sis 174 Special equipment, series equipment 6 Speed, average 67 Speedometer 14 Speed, with winter tires 164 Sport button 91 Sport program, automatic transmission with Step‐ tronic 63 Stability control systems 89 Start/Stop button 55 Start/Stop button, starting the engine 56 Start/Stop button, swi
Reference Everything from A to Z Trunk lid – Emergency activation, refer to Unlocking manually 27 Trunk lid, refer to Tailgate 27 Trunk, refer to Cargo area 27 Turning lamps, refer to Adap‐ tive Light Control 76 Turn signal – Indicator lamp 14 Turn signal, bulb replace‐ ment 178 Turn signals 58 Turn signals, triple turn signal activation 58 U Uniform Tire Quality Grading/ UTQG 160 Unintentional alarms, avoid‐ ing 31 Units – Average fuel consump‐ tion 69 – Temperature 69 Unlocking – From the inside 26 – F
01 40 2 911 475 ue *BL291147500Z* DRIVE ME. Online Edition for Part no.
